Advertisement
Curtis Front End Loader Blade (F.E.L.B.) Storage Instructions
1.) When F.E.L.B. is diconnected, coat all exposed chrome rods on both Angle Ram Cylinders with Light Grease.
The Grease will keep exterior surfaces free from rust and corrosion.
2.) Coat all Pivot Pins and other wear points with Chassis Lubricant.
IMPORTANT
Curtis warrants that Products sold to Customer shall be free from defects in material and
workmanship under normal use and service for one (1) year from the date of shipment.
IN NO EVENT SHALL CURTIS BE LIABLE FOR LOSS OF PROFITS OR INCIDENTAL,
INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER SIMILAR DAMAGES ARISING OUT OF
This limited warranty shall automatically terminate if any product has been improperly installed,
maintained or operated or used for a purpose for which it was not designed. The limited warranty
does not cover Product which has been altered or parts which are expendable by their nature (e.g.
cutting edges, blade guides, springs, nuts, bolts, pins, hoses, etc.). This limited warranty also
does not cover any plows installed on vehicles not designed by the manufacturer for plowing or
not equipped with the manufacturer's snowplow preparation package.
In the event that a Product is defective, Curtis, at its option, will correct such defect at its expense
upon delivery of the Product to Curtis FOB, its Worcester, Massachusetts facility, or refund that
portion of the purchase price allocatable to the defective Product. The remedy contained in the
preceding sentence will be the sole and exclusive remedy against Curtis.
EXCEPT AS SPECIFICALLY PROVIDED IN THIS DOCUMENT, THERE ARE NO OTHER
WARRANTIES EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE.
Notes:
Curtis Industries Inc. LLC, 111 Higgins St., Worcester, MA 01606 TEL: (800) 343-7676 FAX: (508) 854-3377 For Parts and information visit us at www.Curtisindustries.net
Curtis Snow Plows are protected by the following U.S. Patent Numbers: 6,145,222 and 6,209,231 Licensed under U.S. Patent Number 5,568,694 & Canadian Patent Number 2,137,853.
After 2 hours of use, all bolted assemblies on the F.E.L.B. should be rechecked for
proper torque specifications and tightened as needed.
LIMITED WARRANTY
ANY SALE OF PRODUCT OR FROM DEFECTIVE PRODUCT.
Curtis Industries Inc. LLC, reserves the right to change product design or specifications without notice or liability.
Other patents pending.
14 of 14
Advertisement
