Cal Amp 4230 Programming Manual page 2

Step 3 – Pair your Android phone or tablet with the CalAmp device.
1. Upon completion of Step 2 above, the Android phone or tablet should display a list of
available Bluetooth devices. In case the list is not available, tap on the "Scan for
Devices" or "Search" button.
2. After a 5-10 second delay, the "LMU_XXXXXXXX" device should appear on the list
of the Available Devices. If the device is not available in the list, make sure you are in
close proximity to the CalAmp 4230 device (less than 32 feet or 10meters), and the
CalAmp 4230 device is powered on (see Step 1 above).