Advertisement
2011 Scramble Keyboard
Surface Mounting Instructions
Step
1
Determine an appropriate mounting location.
For Wood & Metal: Drill four 2 mm holes approximately 1 inch deep for mounting the keyboard.
2
For Brick Plaster etc: Drill and plug four holes for mounting the keyboard.
3
Drill a 10 mm hole for the cable.
4
Secure the keyboard back box to the mounting surface.
5
Route the cable from the keyboard to the controller.
Test the operation of the keyboard. Assemble the keyboard into the surface box
6
Fit the tamper resistant screws using the special tool provided with the keyboard.
7
Fit the plastic anti tamper rings over the four mounting screw heads.
Flush Mounting Instructions
Document Number: MAN0029
Description
Flush Mounting Kit Tab Options
Min Panel Thickness (mm)
40
22
4
Issue: 3.03
Lugs
Short
Medium
Long
Page 2 of 3
Advertisement
