Table of Contents
Advertisement
Number
1
POWER LED
2
IN 1/2/3/4 LED
3
LINK
4
IR IN
5
INPUT button
5.2 Rear Panel
RESET
1
Number
1
RESET button
2
DC 5V
3
INPUT 1/2/3/4
Name
The LED will illuminate in red when the device is
connected to power supply.
The LED will illuminate in green when HDMI OUT
port is selected an input source.
Network connection LED. The LED will illuminate
when the device connects network signal.
IR receiver window. It receives the IR remote
3 4
control from this product only.
Pressing this button will select IN1/IN2/IN3/IN4
input source to OUTPUT port.
DC 5V
INPUT 1
2
Name
Network connection and firmware upgrade button.
▪ The product will enter network setting status
when the button is pressed up to 3s.
▪ The product will enter firmware upgrade status
when the button is pressed less 0.2s.
(The FOTA to upgrade.)
Plug the DC 5V/1A power supply into the unit and
connect the adapter to an AC outlet.
Connect to HDMI source devices such as DVD
player or set-top box with an HDMI cable.
Function description
1/5
INPUT 2
INPUT 3
3
Function description
3 / 16
INPUT 4
Advertisement
Table of Contents
