6.5 Automatic switch features
① The product has power off memory function. After power off, and these
input signal sources have not been pulled out. The output device will display
the input source of the last power down when the product is powered on again.
② The product is powering on. The output device will display the next input
channel signal when you pull out current input signal source. The priority
order is 1->2->3->4->1...etc.
③ The product is power off. If you pull down current input signal source.
The output device will display the next input channel signal when the product
is powered on again. The priority order is 1->2->3->4->1...etc.
7. IR Remote
IN1
IN2
IN4
IN1/IN2/IN3/IN4: Select IN1/IN2/IN3/IN4 input source
to output display.
IN3
: Loop select input source to output display.
15 / 16