Folding The Rollator; Care And Maintenance - Invacare 65550 Assembly, Installation And Operating Instructions

Installing the Shelf, Basket and Tray
NOTE: For this procedure, refer to FIGURE 2.
NOTE: To remove the shelf, basket, and tray reverse these procedures.
Shelf
Snap the shelf onto the bottom rollator frame tubes.
Basket
Install the basket onto the hooks on the rollator frame.
Tray
Put the tray in place on top of the seat.
Using the Hand Brakes
NOTE: For this procedure, refer to FIGURE 3.
1. Perform one of the following:
• To Stop ‐ Squeeze the brake handles up towards the
rollator handles.
• To Continue Mobility ‐ Release the brake handle.
2. To lock, push down on the bottom portion of the brake
handle.
3. To unlock, pull up on the top portion of the brake handle.

Folding the Rollator

NOTE: For this procedure, refer to FIGURE 4.
1. Remove the tray and basket. Refer to Installing the Shelf,
Basket and Tray.
NOTE: It is NOT necessary to remove the shelf to fold the rollator.
Pinch points exist between the rollator frame tubes.
Make sure hands and body are clear of all pinch points
before folding the rollator.
2. Pull up on the tab to release the locking mechanism.
3. To fold the rollator, lift up on the cross tube.
CAUTION
Lay the rollator down on a flat stable surface. DO NOT
lean the rollator against a wall or other vertical surface.

Care and Maintenance

1. Verify brake operation. Contact your Invacare dealer if
brake adjustment is required.
2. If hand grips are loose, DO NOT use the rollator. Contact
your Invacare dealer.
3. Periodically inspect the casters tightness, wear and
damage.
4. Make sure that the wheels are free of hair, lint and other
debris.
Rollator
WARNING
Tray
Cross Tube
Shelf
FIGURE 2 Installing the Shelf, Basket and Tray
Squeeze the brake
to remain stationary
Push down to
lock the brake
FIGURE 3 Using the Hand Brakes
Tab on Locking
Mechanism
Be aware of
pinch points
when folding
the rollator
FIGURE 4 Folding the Rollator
2
Basket
Lift up to
fold the
rollator
Part No 1163185