Unit Description; Introduction; General Description - Trane Thermo King Magnum Plus Operator's Manual

UNIT DESCRIPTION

UNIT DESCRIPTION

INTRODUCTION

This chapter will briefly describe the following
items:
• General Unit Description.
• Standard Component Descriptions.
• Optional Component Descriptions.

GENERAL DESCRIPTION

MAGNUM units are all-electric, single-piece,
refrigeration units with bottom air supply. The
unit is designed to cool and heat containers for
shipboard or overland transit. The unit mounts
in the front wall of the container. Fork lift
pockets are provided for installation and
removal of the unit.
The frame and bulkhead panels are constructed
of aluminum and are treated to resist corrosion.
A removable evaporator compartment door
provides service access. All components except
the evaporator coil and electric heaters can be
replaced from the front of the unit.
Each unit is equipped with an 18.3 m (60 ft.)
power cable for operation on 460-380V/3 Ph/
60-50 Hz power. The unit power cable is stored
below the control box in the condenser section.
14
Each unit is equipped with 460-380V/3 Ph/
60-50 Hz electric motors. An automatic phase
correction system provides the proper electrical
phase sequence for condenser fan, evaporator
fan and compressor operation.
BEN074
Figure 1: MAGNUM+ Unit