Ocean Signal EPIRB1 Pro User Manual page 16

5.1.2 EPIRB1 Pro Manual Activation
1. Break off the red protective tab from the top of the EPIRB1 Pro.
2. Lift the yellow fl ap up to expose the Red ON/OFF button.
3. Press and hold the red button for 1 second to activate.
(Until the green LED starts to fl ash)
1
The EPIRB1 Pro will now be operational. The strobe lights will begin to fl ash at a rate of
once every 2.5 seconds as soon as the unit is activated.
For best performance it is important that the EPIRB1 Pro is in an upright position with a
clear view of the sky and as far away from any metallic structures as is possible.
The EPIRB1 Pro contains a GPS receiver, ensure that the GPS antenna is not obstructed
and has a complete, unobstructed view of the sky – as indicated on the top of the EPIRB1
Pro.
A lanyard is provided to tether the EPIRB1 Pro to the lifeboat or life raft to ensure that it
does not drift away. Make sure this is fi rmly attached.
16
EPIRB1 Pro USER MANUAL
2
912S-03403-02.00
3
27/07/2020