Page 2
FLINTEC reserves the right to revise this manual and alter its content without notification at any time. Neither FLINTEC nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or failure to strictly comply with FLINTEC operating and maintenance instructions.
Page 3
Type No. of load cells Housing size Inputs Output KAK-4 up to 4 80 x 250 x 52 mm 4x M16 1x M16 The junction box type KAK can be connected to the instrumentation with a shielded 6-wire signal cable.
Page 4
LINTEC ELLS Flintec load cells are manufactured with rather tight tolerances, so in most cases an additional corner correction is not required. The best conditions are achieved if you use load cells of the same class (Designation is done with capital letters A to I on the load cell package besides the type label).