AMX PS2.8 Installation Manual

AMX offers four system power supplies, with several variations available:
AMX PS/N Power Supplies
• PSN6.5
(FG423-41) With U.S. power cord.
(FG423-43) Without power cord.
• PSN4.4
Includes 2-pin captive-wire connector and U.S. power
(FG423-45)
cord, with 3.2 mm captive-wire connector.
• PS4.4 (FG423-44) Includes U.S. power cord and barrel plug.
• PSN2.8
(FG423-17) Includes U.S. power cord, with 3.5mm captive-wire
connector.
• PS2.8 (FG423-05) Includes U.S. power cord, with 5mm captive-wire
connector.
(FG423-11) Includes U.S. power cord and barrel plug.
• PS3.0 (FG 423-30) Includes U.S. power cord and barrel plug.
NOTE: All models use an input connector sanctioned by the IEC (International
Electrotechnical Commission).
FIG. 1 shows the front and rear panels of the PSN 6.5.
FIG. 1
PSN6.5 Power Supply
PSN6.5 Specifications
The PSN6.5 is a Class 1 power supply, is CSA and CE approved, and UL listed.
PSN6.5 Specifications
Dimensions (HWD): • 1.50' x 5.55" x 9.25" (3.81 cm x 14.10 cm x 23.50 cm)
Weight: • 2.76 lbs. (1.25 kg) (without power cord).
Input Voltage: • 90-132 VAC, 2.6A, 47~63 Hz
• 180-264 VAC, 1.3A, 47~63 Hz
Output Voltage: • 13.5 VDC 6.5A
Output Current: • 6.5 A (continuous power output is 90 W max).
Ripple and Noise: • 350 mV peak-to-peak @ 70% load.
Protection: • Over-voltage, over-current, short-circuit, transient and
thermal. Switching regulated, overload protected.
PWR Indicator: • Green LED indicates presence of DC on the output.
Connectors: • Three removable 2-pin 3.5 mm mini-Phoenix connectors
Rear Panel • Three 12 VDC power supply connectors.
Components:
• Standard IEC (male) jack for the power cord.
Input Power Cord: • 6-foot (1.83 m) IEC power cord terminated with a
grounded Edison plug for AC input (U.S. only).
Enclosure: • Metal with black matte finish.
Temperature Range: • 32°F - 122°F (0°C - 50°C)
Certification: • UL: US listed - Class 1 Power Supply
• CSA approved
• CE approved
PS/N Power Supplies
PSN6.5 Specifications (Cont.)
Included • Single Universal input power cord (64-0009)
Accessories:
• Three removable 2-pin 3.5 mm mini-Phoenix connectors
(41-5025)
Optional • AC-RK Accessory Rack Kit (FG515)
Accessories:
NOTE: The PSN6.5 replaces the (obsolete) PSN4.2 and PSN6.3 power
supplies.
PSN4.4 and PS4.4 Specifications
The PS4.4 power supply is identical to the PSN4.4 except that the PSN4.4
comes with a NetLinx compatible 2-pin captive wire connector and the PS4.4
comes with a barrel-plug.
FIG. 2
PS4.4 Power Supply (showing both connectors)
The PSN4.4 and PS4.4 power supplies are Class 1 power supplies; both are
CSA and CE approved and UL listed.
PSN4.4 and PS4.4 Specifications
Dimensions (HWD): • 1.38" x 2.36" x 4.76" (3.5 cm x 6.0 cm x 12.1 cm)
Weight: • 1.1 lb. (.499 kg)
Input Voltage: • 100-240 +10% VAC
Input Frequency: • 47-63 Hz
Input Current: • 1.2A MAX at 115 VAC + full load
• 0.6A MAX at 230 VAC + full load
Output Voltage: • 13.5 VDC
Output Current: • 4.4A MAX
Ripple and Noise: • 150 mV peak-to-peak @ full load
Protection: • Over-voltage, over-current, short-circuit, transient and
thermal. Switching regulated, overload protected.
Power Indicator: • Green LED indicates the presence of DC on the output.
Connectors:
PSN4.4 • Mini 2-pin captive wire connector (3.5 mm).
PS4.4 • Barrel plug (see Barrel Plug Dimensions)
Input Power Cord: • 50 mm IEC power cord terminated with a grounded
Edison plug for AC input.
Enclosure: • Molded black matte plastic.
Installation Guide
Barrel-plug connector
(FG423-44)
2-pin captive wire connector
(FG423-45)