Table of Contents
Advertisement
comply with the test instructions throughout the entire test.
(A minute can feel like a long time. If you prefer to see a time
countdown during the test, you can do so using the app. See
section
6.4.)
5) At the end of the test, the scale will beep, your score will be
displayed (1-10) and the footplate will glow either red, yellow or
green to correspond with the fall risk level associated with your
score.
6) If the user steps off the scale too early, makes erratic movements
during the test, or another error occurs, the scale will display
"Err" instead of a score. In this case, the test must be retaken.
7.3 Modifying Scale Settings
The ZIBRIO Balance Coach App can be used to change the settings
on the scale including the weighing unit (lb/kg) and the balance
testing mode (manual/automatic).
1) Always make sure the scale is connected to the ZIBRIO Balance
Coach App before changing the settings. Refer to
connection instructions.
2) In the ZIBRIO Balance Coach App, click the menu button in
the upper left corner to access the menu.
3) Click "Settings" to access the settings page.
4) Click "lb" or "kg" in the Weighing Mode box to select which
unit you would like to scale to display weight in.
5) Click "save" at the bottom of the settings page to save your
changes.
6) The testing mode can also be changed on this page. By default,
the ZIBRIO SmartScale is in automatic testing mode, meaning
the balance test starts automatically after someone stands on
the scale for 10 seconds. If desired, the scale can be changed to
manual mode, where tests can be initiated through the ZIBRIO
Balance Coach App. Select the desired testing mode, then click
"save. "
16
section 6.4
for
Advertisement
Table of Contents
