Page 1
Product Code 22716 Colour As shown Brief Description Press a coloured circle to change the colour of light in a ROMPA® Wi Fi receiving product. Contents 1 x wall board with 8 bumpas attached ROMPA® Wi Fi receiving products are not included...
Page 2
Wall mount in a darkened room with ROMPA® Wi Fi products in it. Compatible ROMPA® Products ROMPA® offers a large range of Wi Fi responsive products - the range is continually growing – please see our catalogue and website – www.rompa.com. Some compatible products include: 21098, 20848 Sensory Magic®...
Page 3
Safety Use indoors, in dry environments. Please read all the following safety information before each use ALWAYS SUPERVISE THE USE OF THIS PRODUCT Remove all packaging and either store this in a safe place out of reach of clients or dispose of this responsibly.
Page 4
When pressure is applied to a coloured circle the corresponding colour will be activated on the ROMPA® Wi Fi receiving product(s) in the room e.g. light source, colour wall controller etc. A firm press is necessary on the circle. The colour will not be activated unless the circle is pressed –...
Page 5
Is the product plugged in? Are there ROMPA® Wi Fi receiving products in the room? If so, are these plugged in and switched on? Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received –...
Need help?
Do you have a question about the Wi Fi Bumpas and is the answer not in the manual?
Questions and answers