Rompa 21452 Manual

2-port light source

Table of Contents

Download this manual

1. Product Name

2-Port Light Source

21452

White exterior.

With all the key features of our standard light source, but with 2 ports so 2 fibre optic

products can be operated from one light source and one electrical point.

 1 x Light Source

 1 x Power Supply Unit

6. Snoezelen® Stimulations

 Visual

Use with Fibre Optics, Starcloths and Milky Way Carpets in a darkened environment.

Table of Contents

Do you have a question about the 21452 and is the answer not in the manual?

Page 1 1. Product Name 2-Port Light Source 2. Product Code 21452 3. Colour White exterior. 4. Brief Description With all the key features of our standard light source, but with 2 ports so 2 fibre optic products can be operated from one light source and one electrical point.
Page 2 • Wi Fi Interactive Carpet Switch Set 19939 • Sensory Magic™ Touch Screen When activated by a Wi Fi controller, the Rompa® Light Source automatically changes colour to that selected for 1 minute, before resuming automatic mode. 9. Starting Up ...
Page 3  Remove all packaging from the 2-Port Light Source.  Check product to ensure that it hasn’t been damaged in transit. In the unlikely event that any problems are found, contact ROMPA® immediately  Decide where to locate the 2-Port Light Source.
Page 4 Screws (these are the ones that need tightening or loosening when changing/removing the bosses.) Slide boss into the holes Boss Boss  Tighten the screws on the top of the unit to secure the items into the unit.  Connect the Power Supply Unit. If the fit does not seem tight, ‘wiggle’ the lead into the light source, whilst pushing at the same time.
Page 5 Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received – please contact us at producthelp@rompa.com...