Table of contents: 1. Introduction....…………………………...5 1.1. System characteristics........5 1.2. General information........5 2. System functions..........7 2.1. Clock, calendar, language versions....7 2.1.1. Clock setting..........7 2.1.2. Calendar setting........8 2.1.3. Language selection........9 2.2.
In the case where the system is not equipped with a radio with an MP3 player, the logo of Victory Spa is displayed in the radio section (Picture 2). The detailed description of the information displayed in the individual sections of the screen has been included in the subsequent parts of the instruction manual, in the paragraphs describing the individual system functions.
Page 6
a radio section a lighting section a clock section a water functions section Picture 1 The contents of the screen display in work mode Picture 2 The contents of the screen display in work mode when the system is not equipped with a radio with an MP3 player There are five function keys on the control panel: .
2. System functions. 2.1. Clock, calendar, language versions. Portable SPA system is equipped with a real-time clock with a calendar. Due to battery support, the clock is in operation even if the system is turned off. Current time is displayed in a clock part of the screen.
2.1.2. Calendar setting. date setting cancellation of changes month setting confirmation of changes confirmation of changes selection of year setting menu position confirmation of changes Figure 4. Calendar setting. In order to set a calendar, a cursor shall be placed in a clock part of the screen. When button is pushed in, Setting menu will be displayed on the screen.
2.1.3. Language selection. cancellation of change language selection of menu position selection confirmation of change Figure 5. Language selection. In order to select a language, a cursor shall be placed in a clock part of the screen. When button is pushed in, Setting menu will be displayed on the screen. Language position shall be selected from Setting menu by buttons.
Page 10
Blue and green alternating light. Light increases and decreases its intensity fluently, from minimal Blue~ -> Green~ to maximal value. When one cycle is completed and minimum lighting intensity is reached, a colour changes. Blue and yellow alternating light. Action as Blue~ ->...
Page 11
Subject to this, Victory Spa’s liability to the incorrect usage in relation to the Victory Spa Chromotherapy System or in connection with this disclaimer, Victory Spa will not be liable of a consequential, indirect or special loss or damage accordingly.
2.2.1. Switching on the lighting. Lighting works independently from remaining system functions. button shall be pushed in to switch on or to switch off the lighting. Current lighting state is signalled by an icon placed in a lighting part of the screen: - lighting is switched off, - lighting is switched off.
Current receiver state is displayed in a radio part of the screen: - receiver is turned off, - receiver is turned on. When a receiver is turned on, a station number, radio station frequency and volume level are displayed in a radio part of the screen. Station frequency Station...
Figure 9. Automatic frequency setting. While automatic setting, the system does not respond to any command given by buttons. When a station is found (or after a few seconds if the receiver cannot find any station), a window with message is closed and the system returns to a normal working mode. frequency setting Figure 10.
Page 15
volume setting confirmation low tone of changes setting confirmation of changes high tone setting confirmation of changes sound type setting confirmation of changes Figure 11. Receiver parameter setting. Low tones, high tones and a sound type are set by buttons depending on a cursor position.
2.4. MP3 player. Portable SPA system is equipped with MP3 player to play music in MP3 format from MMC card. 2.4.1. Turning on the player. MP3 player works independently from remaining system functions. button on the remote controler or button when a cursor is indicating “Tuner MP3” shall be pushed in to turn on a player.
2.5. Water functions. Portable SPA system is equipped with water functions like water massage, air massage and filtration. Water function setting is displayed in a water part of the screen when water massage, air massage or water heating is being activated. Ambient temperature Water...
2.5.1. Water massage. The function of the hydro massage is carried out through the water pumps. key is used for operating the hydro massage. There is a light-emitting diode (LED) indicating the hydro massage activity next to the key. Pressing key switches on/off the hydro massage.
Page 19
selection of menu position selection of menu position confirmation of changes change of cancellation value of changes change of a cursor position Figure 17. Daily filtration program setting. The following values are set for each program: activity marker, hour of turning on, hour of turning off and temperature.
Page 20
selection of menu position selection of menu position change of weekday confirmation cancellation of changes of changes change of cursor position change of value Figure 18. Weekly filtration program setting. Setting the weekly filtration programs is as follows. When button is pushed in, Menu will be displayed on the screen.
Page 21
mode. button or button (in Monday window) or button (in Sunday window) shall be pushed in to return to Filtration menu. button (return to the window in a working mode) or button (return to Menu) shall be pushed in to exit Filtration menu. button or button shall be pushed in to exit Menu and to return to the window in a working mode.
Page 22
cancellation of changes change of ozonization time cancellation of changes confirmation of changes change of ozonization time confirmation selection of of changes menu position Figure 20. Ozonator working cycle setting. When button is pushed in, Menu will be displayed on the screen. Ozonator position shall be selected by buttons.
1 s. 1 s. Figure 21. Blocking the filtration programs. Program blocking is effective only for a program being currently executed. When a program is completed on schedule, blocking is expired and next program will be executed without blocking. 2.5.3.2. Water heating. button, placed on the control panel, is used for water heating.
Page 24
cursor is indicating filtration time) shall be pushed in to confirm introduced changes and to return to Menu. button or button (when a cursor is indicating minimal temperature) shall be pushed in to cancel introduced changes and to return to Menu. button shall be pushed in to exit Menu.
Page 25
Figure 23. Defreezing turned on. Autofiltration function is turned on if water was not filtered during the filtration period (filtration pump was not turned on). Function is active for time set by Filtration time parameter. Function is turned off in case other function, which activates a filtration pump (water massage, air massage, water heating, filtration program, spa preparation, defreezing) is activated.
3. Wrong system operation. In case of no communication between the control panel and a base plate, error window will be displayed on the screen. In this state use of the system is not possible. Power supply should be disconnected and the service should be informed. Figure 25.
Need help?
Do you have a question about the Portable SPA Classic and is the answer not in the manual?
Questions and answers