Connections - Pioneer XY Series User Manual

Connections

XY-1
! The INPUT and LINK connectors used are Neutrik SpeakON
! Refer to the internal connection diagram and make the appropriate connections
as shown.
XY-1
Rear view
1 INPUT connector
2 LINK connector
XY-2E
! The INPUT and LINK connectors used are Neutrik SpeakON
! Refer to the internal connection diagram and make the appropriate connections
as shown.
XY-2E
Rear view
1 INPUT connector
2 LINK connector
12
Engb
Internal connection diagram
NL4 connectors.
™
Neutrik
NL4 Connector
Internal connection diagram
NL4 connectors.
™
The operation mode of the XY-2E can be changed from the Passive mode (Initial
state) to the Bi-amp mode. When changing the operation mode, be sure to refer to
the Installation Manual. If wiring is carried out incorrectly, it may result in damage to
Neutrik the amplifier and speaker unit.
NL4 Connector
Passive mode
Bi-amp mode
PASSIVE NETWORK