Download Print this page

How To Replace The Fuse; Using Fm Transmitter; Remote Control - Technaxx FMT500 User Manual

Advertisement

How to replace the fuse

In case of sound failure
check the fuse.

Using FM Transmitter

(a) Plug the FM transmitter into your vehicle's cigarette lighter port or power port.
(b) Tune your radio to a free FM frequency first, then match the same frequency to this FM
transmitter.
(c) Insert a SD card into the SD card slot or a USB flash drive into the USB port. Both
storage media have to contain MP3 files, or connect another compatible device using the
audio cable* (*included).
(d) For other compatible music devices or your MP3/MP4 player, use the supplied audio
Line-IN cable to connect from the "Line-OUT" of the other device to this FM transmitter
"Line-IN". When using an external device, all functions will be controlled by the external
devise, neither the transmitter nor its remote control.
REMARK: If you using this function, press "Play/Pause" to stop playing the music from SD
card or USB if you have plugged SD or USB into this FM transmitter already.
ATTENTION: This FM transmitter also supports various regional configurations. Long
press the CH button till the menu appears, choose "Tx-Power" and then press CH to
choose "Europe" (in Europe) or "ROW" (in the rest of the world), then press CH to
confirm. [The sound quality under "ROW" is better than under "Europe" mode.]

Remote Control

Discard Bad Fuse
5 V / 0,5 Amp
Replacement Fuse
Twist Off

Advertisement

loading