Overview; Accessories - GE UUY24ZGDAA Installation Instructions Manual

Overview

It is the responsibility of the installer to ensure all
installation aspects of this product adhere to national,
state, and local codes.
Every possible system difference or work site abnormality
cannot be addressed in this manual. If questions arise, it
is the obligation of the installer to contact the distributor or
supplier of this product for assistance.
To ensure proper performance, the duct system pressure
drop should never exceed the static pressure capacity of
the blower.
Only use and apply accessory heater components that
are approved in this manual.
All work should be performed by persons trained,
experienced, and licensed in the mechanical and
electrical fields.
The manufacturer will not be responsible for equipment
that is under-performing due to a failure to follow the
instructions in this manual or best industry practices.
The manufacturer has the right to revise this manual
without notice.
1. No person should operate, maintain, or service this
equipment unless suitably trained by an industry
professional.
2. Disconnect unit from the power supply if it not to be used
for an extended period.
3. Be certain that you have selected the proper model for the
operating load. Improper selection may impact operating
performance.
4. Please do not disassemble the unit without proper
training. This equipment has undergone strict inspection
and operational testing at the factory.
5. For technical assistance, please contact GE Appliances
technical support
6. If the product is malfunctioning and/or is inoperable,

Accessories

Part
Owner's Manual
Optional Liquid Side Stub Kit
Optional Gas Side Stub Kit
6
please contact GE Appliances technical support. Provide
the following information:
a. Product Nameplate data (model number, cooling / heating
capacity, product serial number, factory date)
b. Nature of Malfunction (specify the circumstances before
and after the error occurred)
7. All illustrations and information in the instruction manual
are for reference only. We retain the right to make
necessary revisions to the product from time to time.
8. GE Appliances assumes no responsibility for personal
injury, property loss or equipment damage caused by
improper installation and commissioning, unecessary
maintenance, or failure to follow relevant federal and state
regulations, industry standards, and the requirements of
this instuction manual.
9. GE Appliances will bear no responsibilities for personal
injury or property damage caused by the following:
a. Improper use of the appliance
b. Altering, maintaining, or operating the product with non-
approved equipment.
c. Altering, maintaining, or operating the product outside of
the guidelines of this manual.
d. Defects caused by corrosive gas.
e. Defects caused by shipping damage.
f. Failure to abide by this instruction manual or government
regulations.
g. Products made by other manufacturers
h. Natural disasters, improper installation environment, or
force majeure.
Owner's
Manual
Owner's
Looks Like
Manual
Owner's
Manual
Quantity
1
1
To connect the unit with the liquid pipe
1
To connect the unit with the gas pipe
31-5000486 Rev. 2