Related Manuals for fallprotec Securope Tempo
Summary of Contents for fallprotec Securope Tempo
- Page 1 User Manual Securope Tempo DOC104-UK -11.09.20 Fallprotec S.A. 43-45. ZA Op Zaemer. L-4959 Bascharage. Luxembourg T +352 26 55 09 30 F +352 26 55 09 30 55 marketing@fallprotec.com...
- Page 2 User Manual Securope Tempo 1. Certification The Securope lifelines are designed and tested according to the European standard: EN795-C:2012 The system conforms to the American National regulation, OSHA 1910 If the system is designed and installed by a competent person (according to OSHA), it may conform to the ANSI standard, ANSI/ASSE Z359.6: 2009...
-
Page 3: Preliminary Checks
User Manual Securope Tempo 2. Preliminary checks It is mandatory to check the following before using the system: The user of the lifeline must be in good physical condition, and not prone to vertigo or dizziness. The user must have received adequate training for the following:... - Page 4 Before using the system, the user must locate the ID-plate installed in the immediate vicinity of the access point and follow the instructions on the board. The plate has a QR code that facilitates access to the Fallprotec web portal where all the data regarding the installation is registered. User manual and inspection log.
-
Page 5: Use Of The System
User Manual Securope Tempo 3. Use of the system Maximal number of users per system For other cases please contact Fallprotec) The connection and disconnection to the system must always be carried out in an area without any risk of a fall. - Page 6 User Manual Securope Tempo Configuration Horizontal (0°-29°) Inclined (30°-60°) Glider LDV001 LDV060 LDV111 LDV075 3.1.1. Openable gliders Inserting/removing the glider on the line Handle 1.Open the handle 2.Let the handle close automatically 3. Conect the carabiner...
- Page 7 User Manual Securope Tempo 3.2. Energy absorber LDV032/LDV003 The energy absorption is carried out during the penetration of the half sphere into the black polymer cylinder. The LDV032 includes a spring which compensates the tension on the line in case of...
- Page 8 4. Coiling the cable for storage The cable must be coiled as per the picture below: 5. In case of fall Maximum Calculated with the Fallprotec Securope calculation software. deformation See technical file of the system supplied by the installer.
- Page 9 User Manual Securope Tempo With a lanyard: Fall clearance Required Deflection Lanyard Absorber Path User Safety Fall clearance < Fall clearance Required Available...
- Page 10 User Manual Securope Tempo Fall clearance Required Deflection Lanyard Absorber User Safety Line Fall clearance < Fall clearance Required Available...
- Page 11 User Manual Securope Tempo With a self-retractable lanyard: Fall clearance Required Deflection blocking Safety Fall clearance < Fall clearance Required Available...
-
Page 12: Prohibited Use
The inspection must be carried out by a certified/authorized installer (Also competent person if under OSHA regulations). The inspection must be registered on the Fallprotec portal www.assistant.fallprotec.com The safety of the user is linked to the maintenance of the efficacy of the system and the resistance of... - Page 13 User Manual Securope Tempo 11. Marking The equipment is marked as follows: Manufacturer : Component name : Standard : EN795-C It is mandatory to read the user manual before use Manufacturing batch (Quarter/Year) Code Component ...