Zidoo NEO X Manual page 8

4K UHD Hi-end Media player
Note:
* In order to get wonderful 4K UHD HDR experience, please ensure that HDMI cable, display
device and AVR all can meet the corresponding technical specifications.
* HDMI audio out and DAC analog audio cannot output at the same time. It is needed to turn
off DAC to output audio from HDMI.
Settings > DAC Audio > Source In > Digital OUtput (Turn Off DAC)
* HDMI audio passthrough is supported by NEO X, if AVR supports more advanced audio
formats, please set HDMI output mode to RAW.
Settings > Audio > HDMI Audio > RAW
2.Audio Output Connection and Installation
Digital audio output includes HDMI audio output, Optical audio output, Coaxial audio
output, USB audio output and Bluetooth audio output. Please select the audio source as
"Digital Output", meanwhile the DAC audio will be turned off.
① Digital Output
❶ Connect DAC or AVR by Optical/Coaxial
Connect NEO X with AVR by Optical/Coaxial audio cable, switch to corresponding signal
source on DAC or AVR.
Note:
Optical/Coaxial supports up to 5.1 output.
Page 32
Optical cable/Coaxial cable
DAC/AVR