Smart Control - Zidoo NEO X Manual

4K UHD Hi-end Media player
❸ Bluetooth Audio Input
A Independent CSR8675 flagship Bluetooth audio module has been built in NEO X, which
supports SBC and AAC lossless audio protocols and can receive Bluetooth audio signals from
mobile devices as a Bluetooth decoder.
Settings: Source In >
Open Bluetooth on mobile device and search "NEO X" and finish pairing.

4. Smart Control

① RS-232
NEO X RS-232 port can be used for most home theater control system. RS-232 control
protocol can be downloaded on Zidoo official website. If you want to integrate NEO X into
control system, please contact with relevant distributors or AV installers.
② Trigger Port
There are 3.5mm standard 12V Trigger IN/OUT ports on NEO X. NEO X Trigger IN port is
connected to Trigger OUT port of CD player/ digital decoder, and NEO X Trigger OUT is
connected to Trigger IN port of active speaker/headphone amplifier. All of these devices can
be connected by 3.5mm trigger cables.
Note：
Trigger cables is 2-pin 3.5mm. You can also use a 3-pin AUX cables instead.
Page 38
Bluetooth In
3.5mm cables
Headphone amplifier/active speaker Trigger IN
3.5mm cables
CD player/digital decoder Trigger OUT