Related Manuals for VARDE OVNE Nova 1
Summary of Contents for VARDE OVNE Nova 1
- Page 1 Varde Nova 1 Installation and User guide Revision 1 Pottemagervej 1, 7100 Vejle, Denmark. www.vardeovne.dk...
-
Page 2: Table Of Contents
Henrik Nøhr Varde Ovne A/S Index Welcome and index Page 2 Technical specifications Nova 1 Page 3 Regulations and approval Page 4 Flooring and distance Page 5 Chimney... -
Page 3: Technical Specifications Nova 1
Technical Specifications Nova 1 Model Nova 1 Combustion chamber: (H x W x D): Height (mm) 1036 380 x 350 x 250mm Wide (mm) Depth (mm) Flue outlet Ø 15 cm Weight (kg) Installation height top: 102cm Effect 3-6 kW... - Page 4 All Varde Ovne stoves are closed fireplaces. stoves. Please follow these regulations closely. The stove is designed for intermittent com- Inspection of installation...
- Page 5 Flooring: If the floor on which the stove is to be placed is inflammable, the floor must be covered with non -flammable material, such as steel or glass plate, floor tiles or artifical slate, covering an area of at least 15 cm from the sides of the stove and at least 30 cm from the front of it. Regarding the front, however, we recommend 50 cm.
-
Page 6: Chimney
For rear connection of flue pipe see page 15 Information about the new cast iron adapter Your stove is equipped with the new cast iron adapter from Varde Ovne. The adapter is suitable for smoke pipes with inner diameter on 150 mm. - Page 7 Continual fresh air Overheating A continual supply of fresh air is required in the Occors if too much wood is placed in the room in wich the stove is situated. This can be stove or if the Fire receives too much air. achieved by installing 1-2 vents, whilst also ensur- ring that these can not be blocked.
- Page 8 Shake grate. How it works The Shake grate is placed in the bottom of the chamber. Start During normal operation, 1 Pull the handle towards the Shakegrate must be yourself to open the Air closed. Inlet. 2 Pull the aircontrol handle out to open fully for the air.
- Page 9 How to light and stoke a fire The first time you light up the stove, the enamel will temper and give off some smoke and a slightly burnt smell. We recommend that you leave doors and windows open, as airing the room will make the smell disappear.
-
Page 10: Operation
Operation Shake grate Wood catch Vermiculit plates Ash tray Cast iron Door Cast iron Top Flue collar Handle for Air regulation Handle for Ignition Air Storgage... -
Page 11: Vermiculite
Vermiculite is a very porous material and should be handled with care. When refilling the stove, stoke the wood carefully and use a glove. Only use original parts from Varde Ovne A/S Vermiculit set, Item no.: 100310... - Page 12 What kind of wood to use? The new stove Generally, beech wood is considered the best The first time you light up the stove the ena- type of wood for burning. It burns evenly mel will temper, and give off some smoke and without producing much smoke and ashes are a slight smell.
-
Page 13: Maintenance
½ cm wide. Only original spare parts from Varde Ovne A/S may be used. The door is fitted on a lock spring, which pulls the door in. This is a regulatory requirement in certain countries. -
Page 14: Troubleshooting
Troubleshooting. Smoke enters the room • Not enough draught in the chimney. • Inspect the flue pipe or the chimney for blockage. • Make sure the height of the chimney is correct. The glass or the chimney soots up • The wood is too moist. •... - Page 15 Spare Parts If Spare parts at any time should be needed, please chech the list below. Vermiculit Set Item no.: 100310 Front glass, Item no.: 100284 Glass inside, Item no.: 100285 Glas - Sidepanels, Item no.: 100286 Sealings—Door , Item no.: 100351 Door , Item no.: 100993...
- Page 16 External air supply These stoves are specific designed for external air supply. There can be many reasons for the need of choosing an external air supply system, some of the more common reasons are: Newer houses there are designed to be low energy houses ...
-
Page 18: Warranty
For any deficiencies that are covered by this warranty, upon delivery to the customer, or for deficiencies that arise during the warranty period, VARDE Ovne accepts to either send a suitable replacement component at no charge to remedy the deficiency, to exchange the item, to issue a refund against return of the item or to offer a partial refund depending on the specific situation.