Table of Contents
Advertisement
Quick Links
1. Product Name
Vibrating Floor by ROMPA®
2. Product Code
14925
3. Colour
As specified
4. Brief Description
This cushioned wooden floor vibrates automatically or in response to music or vocal stimuli.
It is particularly suitable for those with mild or total sight/hearing loss as it provides valuable
tactile stimulation.
5. Contents
1 x Vibrating Floor (includes platform, 2 speaker boxes, 2 leads with 2 mono jack plugs attached)
1 x Amplifier
1 x Oscillator (Control Box)
1 x Microphone
1 x Blue lead with 2 RCA plugs on each end (red/white)
Please note: Music system/Stereo not included
1 x Remote Box (wired not wireless)
Advertisement
Table of Contents
Related Manuals for Rompa 14925
Summary of Contents for Rompa 14925
- Page 1 1. Product Name Vibrating Floor by ROMPA® 2. Product Code 14925 3. Colour As specified 4. Brief Description This cushioned wooden floor vibrates automatically or in response to music or vocal stimuli. It is particularly suitable for those with mild or total sight/hearing loss as it provides valuable tactile stimulation.
- Page 2 7. Best Use Use on a flat, stable floor with cushions and pillows to make sure the individual using the product can lie comfortably. 8. Compatible ROMPA® Products 20551 – Microphone 21986 – Hi-Fi Audio System with Bluetooth 9. Starting Up Please note: Please make sure all connections are OFF before switching components ON.
- Page 3 12. Technical Specification Size: 2m x 1m x 35cmH Amplifier: code 22956 Fuses: 10 Amp fuse in the UK plug of the Amplifier Oscillator (Control Box): T100mA 13. Installation Choose a safe and suitably location for your Vibrating Floor. This product requires two wall sockets –...
- Page 4 Switch the Oscillator on at the front (this is either a green or red switch - the colour is for identification and has no other significance). Switch the Amplifier on at the back. The VOLUME control on the Amplifier is for adjusting the volume. The dial on the front of the Oscillator increases the frequency.
- Page 5 Amplifier to AUX 1. A lead is not included by ROMPA – use a lead included with your own device. - Adjust the large dial on the right hand side of the front of the Amplifier to Bluetooth if using a Bluetooth device.
- Page 6 Make sure the BASS control is not set to the maximum – turn this down. Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received –...
Need help?
Do you have a question about the 14925 and is the answer not in the manual?
Questions and answers