Huawei eA260 Series User Manual page 15

eA260 Series CPE
User Guide
Panel
The panel of the eA260 provides the Power over Ethernet (PoE) port, SIM card maintenance
window, and indicator.
Figure 2-2 shows the panel of the eA260.
Figure 2-2 Panel of the eA260
1 Power indicator
5 Mode indicator
9 Power port
13 LAN indicator
17 External antenna port
Table 2-1 lists the buttons on eA260.
Table 2-1 eA260 buttons
Item
Power button
WPS button
Reset button
Issue 01 (2015-05-30)
2 WLAN indicator
6 Signal indicator
10 USB port
14 WPS button
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 WPS indicator
7 USIM card slot
11 TEL port
15 Reset button
Description
Press this button to power the CPE on or
off.
After the WPS function is enabled, press
and hold this button for more than 0.5
seconds to initiate WPS interconnection.
Press and hold for more than 2 seconds to
restore the CPE to its factory settings.
NOTE
Restoring the default settings of the CPE will
override all the previous settings.
2 Hardware
4 TEL indicator
8 Power button
12 LAN port
16 WLAN button
11