Table of Contents
Advertisement
EN
4. TOOL OPERATION
4.1 You are advised to lubricate the tool before
each use (see section 6) (1).
4.2 Connecting the air using the quick coupling
(2).
4.3 Adjust the operating pressure so that it
remains within the operating pressure range
specified for the tool (3).
4.4 Do not stress the tool. The drill/rotation
must be smooth and without strains/locking.
4.5 To reverse the rotation clockwise/
counterclockwise press the F/R button on the
left side of the tool (4).
4.6 Replace the drill bit when becomes
ineffective in order to prevent dangerous
breakage
WARNINGS:
do
not exceed a value of 6,3 bar
(0.63 Mpa)
OIL
1
2
3
4
73
6,3 bar
max
Advertisement
Table of Contents
