Machine Nomenclature; Machine Setup - Lowe 500 Classic Operator's Manual

Mounting Bracket
Your new auger drive unit comes completely assembled from the factory. However, some items may have loosened
or become lost during shipping or use. Because of the elements in which an auger operates, the following checklist
should be thoroughly completed each time before the machine is used.
Make certain that all power sources are disconnected before servicing!
1) _________
2) _________
3) _________
4) _________
5) _________
6) _________
7) _________
Warning: Do Not use a "Hole Top" cleaning device that extends past the normal working diameter of
the auger. Use of such a device greatly increases the chance of accidentally striking another person
or object, causing possible serious injury or equipment damage.
*Always follow manufacturer instructions*

MACHINE NOMENCLATURE

Auger Bit
Center Point

MACHINE SETUP

All nuts, bolts, and other hardware are tightened securely.
All safety covers are secured in their proper positions.
The two attachment hoses that run from the loader to the auger are secure and
are long enough to perform the full range of the auger's capability. Such hoses
are usually not supplied with the drive unit.
The auger mounting bracket is properly secured to the loader's boom and all
levers and/or pins are properly locked in place.
All hoses and fi ttings are properly tightened to avoid leaks.
All controls operate freely and in the correct manner.
The operator has been briefed on proper operation of the auger.
*AAA Rent-All 225-291-1356*
III
Hose Kit
Connecting Link
Auger Drive Unit
Auger Pin
Teeth
IV
4
4