Safety Information - Lowe 500 Classic Operator's Manual

Hydraulic

Hide thumbs

Table Of Contents

Table of Contents

The Safety Alert Symbol is used in this manual to highlight messages where your safety is involved.

To emphasize special information, the words listed below carry speciﬁ c meanings and should be carefully reviewed.

Danger .................. Denotes the most serious potential hazard(s).

Warning ................. The personal safety of the operating personnel or other persons may be

Caution .................. General reminders of good safety practices or to direct attention to

Note ...................... This is special information which may make operation of maintenance

LOCATION OF SAFETY WARNINGS:

SD-5

WARNING

AVOID INJURY OR DEATH

READ AND UNDERSTAND

CHECK FOR

OPERATOR'S MANUAL

UNDERGROUND

BEFORE OPERATING OR

UTILITY LINES

SERVICING MACHINE

STAND 10 FT. (3 m) OR MORE AWAY UNLESS OPERATING MACHINE

Worn, damaged, or illegible labels should be replaced. New labels may be obtained from the manufacturer. Labels

are listed under speciﬁ c part numbers and are included in the safety decal illustration.

All worn, damaged, unusable, or missing safety shields should be replaced. New shields may be obtained from the

manufacturer. They are listed with a speciﬁ c part number and are included in the exploded parts diagram.

Obligations and Usage:

This product is intended to be used only under the guidelines of this manual and relevant literature published by

LOWE

Manufacturing Company, Inc. It is the owner's and/or operator's obligation to ensure this product is operated

only for its intended uses. Operation contrary to guidelines set forth may cause premature breakage of the equipment

and create serious safety problems.

*Always follow manufacturer instructions*