Related Manuals for Stealth Products HMO400-KK
Summary of Contents for Stealth Products HMO400-KK
- Page 1 Head Support Hardware USER MANUAL HMO400-KK Stealth’s User Manual and Maintenance Guide for the Kid Kart Headrest Hardware...
- Page 2 Customer Satisfaction Stealth Products strives for 100% customer satisfaction. Your complete satisfaction is important. Please contact us with feedback or suggested changes that will help improve the quality and usability of our products. You may reach us at: Stealth Products, LLC...
- Page 3 Important Information Important Information! All persons responsible for fitting, adjustment, and daily use of the devices discussed in these instructions must be familiar with and understand all safety aspects of the devices mentioned. In order for our products to be used successfully, you must: ...
-
Page 4: Introduction
Ordering Documentation You can download additional copies of this user manual on the Stealth website: https://stlpro.site/stealth-docs and search: HMO400-KK User Manual in the search bar at the top of the page. -
Page 5: Warranty
Warranty Our products are designed, manufactured, and produced to the highest of standards. If any defect in material or workmanship is found, Stealth Products will repair or replace the product at our discretion. Any implied warranty, including the implied warranties of merchantability and fitness for a particular purpose, shall not extend beyond the duration of this warranty. -
Page 6: Table Of Contents
Table of Contents 1.0 Customer Satisfaction ................i 2.0 Important Information ................ii 3.0 Introduction .................... iii 4.0 Warranty ....................iv 5.0 Table of Contents ..................v 6.0 Warning Labels ..................vii 6.1 Warning Labels ....................vii 6.2 Limited Liability ....................vii 6.3 Testing ........................ -
Page 7: Warning Labels
Initial setup and driving should be done in an open area free of obstacles until the user is fully capable of driving safely. The HMO400-KK should always be tested without any person sitting in the wheelchair until every alteration of the physical installation or adjustment of the... -
Page 8: Parts And Accessories
Parts and Accessories Intended Use The HMO400-KK is a specially designed hardware to mount to one of Stealth’s various headrests onto our Ultra Lightweight Pediatric Back (TFBN), utilizing a 1” mounting ball. With two planes of adjustment, you have the ability to position the headrest’s height and depth to orient the end users head perfectly. -
Page 9: Installation Instructions
Installation Instructions To install the HMO400-KK, look at the assembly picture below: Hardware Mounting To mount the HMO400-KK to the hardware, follow the instructions below: CAUTION When tightening screws, turn loosely until the screw stops, then tighten one quarter turn more. Overtightening screws may cause product malfunction and... -
Page 10: Headrest Mounting
Installation Instructions Headrest Mounting To mount the HMO400-KK to the headrest, follow the instructions below: CAUTION When tightening screws, turn loosely until the screw stops, then tighten one quarter turn more. Overtightening screws may cause product malfunction and irreversible damage. -
Page 11: Positioning
The HMO400-KK is height adjustable on the mounting hardware and headrest. To adjust the height on the mounting hardware, follow the instructions below: Depth Adjustment To adjust the depth of the HMO400-KK on the mounting hardware, follow the instructions below: CAUTION When tightening screws, turn loosely until the screw stops, then tighten one quarter turn more. -
Page 12: Headrest Adjustment
Positioning Headrest Adjustment To adjust the HMO400-KK position on the headrest, follow the instructions below: CAUTION When tightening screws, turn loosely until the screw stops, then tighten one quarter turn more. Overtightening screws may cause product malfunction and irreversible damage. -
Page 13: Maintenance
Maintenance 10.0 Maintenance 10.1 It is recommended that all products be checked for wear and function on a periodic basis and repaired, if necessary, by a wheelchair professional. Repairs should be done with Stealth parts, fasteners, or items appropriate for the service needed. -
Page 14: Disinfecting
Maintenance 10.0 Disinfecting 10.3 When needed, surfaces can be wiped with an approved disinfecting product. Ensure the disinfectant is approved for finished steel, aluminum, plastic, and non-upholstered surfaces. Covers– follow the fabric care labels affixed to the product. ... - Page 15 NOTES 11.0...
- Page 16 Stealth Products, LLC. • info@stealthproducts.com • www.stealthproducts.com +1(800) 965-9229 | +1(512) 715-9995 | 104 John Kelly Drive, Burnet TX 78611 P91D16 Revision Date 2019-12-17...
Need help?
Do you have a question about the HMO400-KK and is the answer not in the manual?
Questions and answers