Table of Contents
Advertisement
Available languages
Available languages
o
Perating the air Purifier
Third press this button to turn off the UV lamp. After sleep mode indicator flickers
10 times, sleep mode is ON again.
Forth press this button to turn off the Sleep mode.
Note: Sleep operated is not to be remembered in program after re-plugging the
machine.
4. "Timer" button
•
By pressing this button, the purifier can be timed to operate for intervals
of 2 hours, 4 hours and 8 hours, stopping automatically when the selected
operating time has elapsed.
•
Press this button (Timer) to select the required operating time. A warning
light automatically indicates the remaining operating time.
•
To
select
repeatedly until there are no more indicator lights lit up.
Important note : When the unit is not in use, please switch it off and unplug
it.
5. Installing & removing filters
The POWER light flickering continuously indicates that it is time to replace the
filter. Replace the filter according to the directions below then press the POWER
button holding for 5 seconds to restart the program system. The light will stop
flickering:
•
Upside down the machine
•
Remove the screw below the base then the base
•
Take out dirty filter and insert new filter into the unit.
•
Reattach the base to the unit and fasten it by screw
•
Press and hold POWER Button for 5 seconds
to reset program.
EXEMPL'AIR
the
continuous
operating
mode,
16
press
the
button
44018-04-18
Advertisement
Table of Contents
