Page 2
Firich Enterprise Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Firich Enterprise Co., Ltd assumes no responsibility for its use, nor for any infringements upon the rights of third parties, which may result from its use.
Page 3
Safety Precaution Please observe the following precautions to ensure safe use of equipment. Disconnect the equipment from AC outlet before cleaning. Use only moist cloth (with water). Do not use detergent. Power outlet must be easily accessible and near the equipment. Keep the equipment away from humid and dusty environment.
Introduction PP-1635 (Aer PPC) ......................7 Overview..........................8 Dimension ..........................9 Tilting Angle ........................10 I/O Connectivity ......................... 11 Packing List ........................12 Hardware Installation and Upgrade 2.5” SATA Storage (HDD / SSD) ..................13 MSR / iButton / RFID / FingerPrint (ID Device)..............14 Power Setting (COM / Cash Drawer Port) ................
Page 5
錯誤 尚未定義書籤。 EETI TouchKit Control Panel ............... Wireless LAN Driver for Windows ..................29 Specifications Troubleshooting Touch Panel does not work ....................31 OSD Buttons do not work ....................31 HDD / SSD is not detected ....................31 MSR does not function properly ..................31 LAN does not function properly ..................
PP-1635 (Aer PPC) PP-1635 is the latest member of Aer PPC series that features a slim all-in-one design with great versatility. It can be easily configured to meet the demand of different store environments. PP-1635 is a fanless system in die-cast aluminum chassis that is with stands harsh environments.
Overview 15” Touch Display HDD Indicator Power Switch (w/ LED) System on: BLUE System off: Integrated Customer Display SATA Storage MSR / ID Device Speaker...
RI / 5v / 12v (select in BIOS) COM 3 D-Sub 9 RI / 5v / 12v (select in BIOS) COM 4 RJ-45 RI / 5v / 12v (select in BIOS) Packing List Standard Optional PP-1635 Power Adapter (60w) AC Power Cord RJ45-DB9 Cable...
UNPLUG POWER CORD BEFORE SATA STORAGE IS REMOVED 2.5” SATA Storage (HDD / SSD) power off and unplug power cord from PP-1635 remove SATA storage cover fix SATA storage to metal bracket via 4 screws 2.5” install SATA storage with bracket...
replace SATA storage cover plug in power cord and power on MSR / iButton / RFID / FingerPrint (ID Device) remove plastic cover plug in ID device (USB) and fix it via 1 x M3 screw...
Power Setting (COM / Cash Drawer Port) You may select the power (5v / 12v) of COM in BIOS Make sure the device voltage matches the power setting before connection...
Integrated VFD / LCM remove the back cover connect customer display via serial cable customer display (integrated type) is connected to COM6 5mm LCM Module (AP-2025) is 9mm VFD (AP-2029), 9mm LCM 20x2 (AP-2024), LCM 240x64 (AP-240G) are * make sure the power setting of COM6 is correct before customer display is connected do not exceed the tilt angle as this may damage internal cable...
Page 17
Load Factory Default Choose “Load Factory Default” to reset BIOS setting which defined in FEC factory.
Please make sure the voltage and cable pin assignment of your cash drawer matches the cash drawer port on PP-1635. You may find the jumper setting and pin definition in M/B J1900 user manual. Please refer to trouble shooting if the cash drawer cannot be detected by PP-1635 To open drawer 1 (the default): port[openaddr] <= open1 wait(sleep(ms)) port[openaddr] <= close...
Intel J1900 Chipset Utilities for Windows 7 1. download drivers from www.fecpos.com/en-global/ams/Download “setupChipset_10.0.13PC” Win7 32 bit “setupChipset_10.0.13PC64” Win 7 64 bit 2. run SetupChipset.exe...
Audio Driver for Windows 7 1. download drivers from www.fecpos.com/en-global/ams/Download 2. run Steup.exe 3. restart PP-1635 to complete installation...
Intel Graphic Driver for Windows 7 1. download drivers from www.fecpos.com/en-global/ams/Download 2. run Steup.exe 3. restart PP-1635 to complete installation...
Intel TXE Update for Windows 7 1. download drivers from www.fecpos.com/en-global/ams/Download 2. run kmdf1.11-win-6.1-x64.exe 3. restart PP-1635 to complete installation...
USB 3.0 Driver for Windows 7 1. download drivers from www.fecpos.com/en-global/ams/Download 2. run Steup.exe 3. restart PP-1635 to complete installation...
This guide is for people with strong knowledge in computing hardware Touch Panel does not work check the connection between touch panel and touch controller HID USB touch device is detected by O/S (P-Cap) P-Cap touch is detected by O/S or try reinstallation (P-Cap touch calibration) reboot the system and P-Cap touch will calibrate automatically OSD Buttons do not work press each OSD button for more than two seconds to trigger its function...
COM does not function properly check the I/O ports in CMOS check IRQ conflict check mainboard and I/O cable Cash Drawer Port does not function properly pin assignment of cash drawer matches that of RJ11 cash drawer port check I/O port address...