Popp Smart Thermostat User Manual

19-3-2021

POPP Smart Thermostat user guide

Modified on: Thu, 21 Jan, 2021 at 9:31 PM

POPP Smart Thermostat is a connected radiator thermostat for residential use. It is battery powered, compact, easy to

operate, and install with a manual hand wheel and single button.

This product is Zigbee Certified using Popp Zigbee technology

POPP ZB-Stick, ZB-Shield and with third-party certified systems compatible to Zigbee 3.0.

Package contents

1x POPP Smart Thermostat

1x Adapter for Danfoss RA-Valve

1x Adapter for Danfoss M30-Valve

1x Adapter for Danfoss RAV

1x Adapter for Danfoss RAVL

1x User Guide

2x Battery 1,5V AA LR6

1. Determine the correct adapter to use with your Popp Smart Thermostat

2. Insert the batteries, then mount the thermostat onto the adapter by turning it until you hear a click.

3. Leave the Smart Thermostat in mounting mode, which will be shown by the "M" on its display.

https://aeotec.freshdesk.com/support/solutions/articles/6000245082

POPP SMart Thermostat User Guide : Aeotec Help Desk

(https://www.popp.eu/technologies/)

, compatible with the

1/4

Table of Contents

Do you have a question about the Smart Thermostat and is the answer not in the manual?

Page 1 POPP Smart Thermostat user guide Modified on: Thu, 21 Jan, 2021 at 9:31 PM POPP Smart Thermostat is a connected radiator thermostat for residential use. It is battery powered, compact, easy to operate, and install with a manual hand wheel and single button.
Page 2 19-3-2021 POPP SMart Thermostat User Guide : Aeotec Help Desk Adapter The following adapters below are included in with Smart Thermostat. Adapter code number can be found below each adapter illustration. https://aeotec.freshdesk.com/support/solutions/articles/6000245082...
Page 3 App or user interface if you are not sure how. 3. Tap/Press the button on the POPP Smart Thermostat once. The connection symbol on the Screen will start to flash 4. The POPP Smart Thermostat should now appear in your gateways app or user interface.
Page 4 POPP Smart Thermostat. Device Reset If you need to pair POPP Smart Thermostat to a new Zigbee hub/gateway, you must factory reset this device before it can be paired to a new hub. To factory reset POPP Smart Thermostat: 1.