Download Print this page

Popp 010101 Manual

Radiator thermostat

Table of Contents

Download this manual

Radiator Thermostat

Manual

Quick Start

This device is a Z-Wave sensor and a Z-Wave actuator which can integrate a water based room radiator into a Z-Wave network.

Click on the

function button will confirm inclusion or exclusion and wakeup the device for wireless communication. A long

push for 3 seconds on the function button enters and leaves the management mode indicated by a 'M' on the LCD display.

Please refer to the chapters below for detailed information about all aspects of the products usage.

010101

Table of Contents

Need help?

Do you have a question about the 010101 and is the answer not in the manual?

Page 1: Quick Start
010101 Radiator Thermostat Manual Quick Start This device is a Z-Wave sensor and a Z-Wave actuator which can integrate a water based room radiator into a Z-Wave network. Click on the function button will confirm inclusion or exclusion and wakeup the device for wireless communication. A long push for 3 seconds on the function button enters and leaves the management mode indicated by a 'M' on the LCD display.
Page 2: Product Description
The Popp radiator thermostat can be mounted to valves with standard M30x1.5 connector or RA2000. Opposite to the Danfoss TRV this device will report the room temperature as detected and calculated by the device’s temperature sensor.
Page 3 If the controller being included was a primary controller, it has to be reset first. Quickly press and release the function button for Inclusion/Exclusion. Observe both controller and Popp radiator thermostat for status of the process.
Page 4: Technical Data
© 2016 POPP & Co. While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. Popp & Co. shall be liable only to the degree specified in the terms of sale and delivery.