Mustee CareGiver 390 Series Installation Instructions

390
Model:
SERIES
READ ALL INSTRUCTIONS CAREFULLY AND INSPECT PRODUCT FOR DAMAGE BEFORE STARTING YOUR INSTALLATION
Straight

INCLUDED IN CARTON:

One (1) straight CareGiver
One (1) set of installation instructions

TOOLS AND MATERIALS REQUIRED FOR INSTALLATION:

Electric drill
/ " wood or metal drill bit
1
8
/ " masonry drill bit (Only needed if installing on a tiled wall. See instructions, Step 1)
1
4
Tape measure
Screwdriver
Level
Eight (8) #12 x 2" pan head self-tapping screws

PREPARATION:

Check local code for proper placement of Grab Bar to meet requirement
such as ADA or ANSI 117.1 Consumer Safety Requirements.
Before installing the Grab Bar you wil have to prepare the area.
Rough-in Installation: Determine where the Grab Bar will be mounted
and install bracing to the rough-in framing to support the Grab Bar through
the shower wall.
Existing Wall Installation: Locate stud behind the existing shower wall to
determine where the Grab Bar can be safely mounted.
Clean that portion of the shower wall where the Grab Bar will be installed.
Please read the instructions before proceeding with the installation.
CareGiver
strength and rigidity of the material to which
they are mounted. They must be mounted
through shower wall and screwed directly to
wood or metal stud.
Installation INSTRUCTIONS
CareGiver
Angled 90°
grab bar
®
Grab Bars are only as strong as the
®
® Straight & Angled Grab Bars
Angled 120°
E.L. Mustee & Sons, Inc.
Email: info@mustee.com
Inside Corner
Twist-Lock Concealed Flange
5431 West 164th St.
Brook Park, OH 44142
Phone: 216.267.3100
Fax: 216.267.9997
Web: www.mustee.com
T-Style