Advertisement
Functions & Operations
1
Volume Control: The audio level (volume) can be increased or decreased with this
illuminated VOLUME control knob.
2
Subwoofer Control: The Subwoofer output level is controlled by the SUB
illuminated knob.
3
Fader Control: Allows to control the front and rear output levels.
4
Input Selection: Allows to select input channel 1, 2 (AUX).
5
LED Selection: Allows to change the control knob back light illumination color from
red to blue.
Sub Bass Control: This control allows to adjust the sub bass volume at 45Hz to
6
increase or decrease.
7
Mid Bass Control: This control allows to adjust the mid bass volume at 120Hz to
increase or decrease.
8
Mid Range Control: This control allows to adjust the mid bass volume at 2.2KHz to
increase or decrease.
9
Treble Control: This control allows to adjust the treble volume at 12KHz to
increase or decrease.
10
Power Connectors: This is the input jack that supplies power, ground and remote.
The 12+ Volt Terminal Connects to either constant +12 volts or to an accessory
switched +12 volt source. The radio power wire is preferred source. (This is a
fused power wire).
The Ground Terminal Connect to chassis ground.
The Remote Terminal Connect to the source unit remote or antenna output wire
that provides +12 volts when the source unit is "on" and 0 volts when the source
unit is turned "off."
Front Outputs: This is high pass output to be connected to the amplifier(s) inputs
11
for front speakers.
Rear Outputs: This is high pass output to be connected to the amplifier(s) inputs
12
for rear speakers.
13
Subwoofer Outputs: The subwoofer left & right are low pass outputs when
crossover is used and are connected to the subwoofer amplifer(s) inputs.
Input 2 (AUX): Channle 2 input from the source unit (radio/CD player) have L & R
14
unbalanced inputs which are directly routed to the internal EQ and passed though
to the Channel 2 outputs. Each input can be choosen independently by the input
selector switch.
Advertisement
