Download Print this page

Specifications - Hifonics HFEQ-2 Operator's Manual

Advertisement

Specifications

OUTPUT CHANNELS (LEFT/RIGHT)
INPUT CHANNELS (LEFT/RIGHT)
INPUT RANGE OF GAIN CONTROL (dB)
MAXIMUM INPUT VOLTAGE (V)
INPUT IMPEDANCE (K-OHMS)
MAXIMUM OUTPUT VOLTAGE
VOLUME GAIN (dB)
-3dB LOW PASS FREQUENCY (Hz)
-3dB HIGH PASS FREQUENCY (Hz)
LOW PASS/HIGH PASS SLOPE/OCTAVE
EQUALIZATION FREQUENCIES (Hz)
EQUALIZATION CYT OR BOOST (dB)
DISTORTION AT 1kHz - 1V (%)
CHANNEL SEPARATION AT 1kHz (dB)
SIGNAL TO NOISE RATIO (dB)
FREQUENCY RESPONSE (Hz) (-1dB)
Visit Hifonics.com
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it's discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation, and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Autotek products are designed and engineered in the USA by
WARRANTY
www.maxxsonics.com
FRONT/REAR/SUBWOOFER
INPUT 1 / INPUT 2
>40
>10
>20
>9
>40
50>80>120
80>120>200
12
45>120>2200>12000
18
.01
>80
>100
10-50K
HF HFEQ-2 QSG 01 - rev1

Advertisement

loading