Stalls; Understanding Your Stalls; Operation; Installing The Partition - Ifor Williams Trailers HBE User Handbook Manual

5 STALLS

The HBE uses a single longitudinal partition
mounted on two "legs". It is fixed into place
with the breast bars. The partition can be
easily moved and removed with the help of
an assistant.
NOTE. It is illegal to carry two or more
horses in an un-partitioned trailer.
5.1 UNDERSTANDING
YOUR STALLS
1. Partition leaf.
2. Partition skirts.
3. Front "leg".
4. Rear "leg".
5. Rear "leg" locking knob.
6. Rear "leg" keyed fitting.
7. Front "leg" keyed fitting.
8. Breast/Breeching bar.
9. Hook end fitting.
10. Pin end fitting.
11. Linch pin & chain.
24
BREECHING/BREAST BAR

5.2 OPERATION

5.2.1 INSTALLING THE PARTITION

1. With the aid of an assistant, lift the partition
2. Ensure the angle of the front leg "key"
3. Rotate the partition so that the rear leg is
BREAST BAR
BRACKETS
1
3
7
9
into position above the front keyed slot.
lines up with the keyed slot in the floor and
lower the leg into the slot.
above the slot in the floor, ensuring that
the "key" at the bottom of the leg aligns
with the slot in the floor.
5
4
6
2
8
10 11