Table of Contents
Advertisement
outside of the trailer a full 180 degrees
so that the handle is pointing directly
upwards as per the image on page 22, thus
unlatching the ramp.
ii. Pull the side hinging
release bolt to
release the door
and pull it up into
the notch (this
notch will not
hold the bolt in place, it is there to help
ergonomically).
iii. Swing open the rear door.
4.2 UNDERSTANDING
THE INSPECTION
DOOR
The inspection door is a lockable door that
can be locked with a key from the outside and
locked or unlocked from inside the trailer.
LEFT HAND DOOR LOCK
1. Inner lock turn handle to this
position to open.
2. Inner lock turn handle to
this position to Unlock but
not to open.
3. Inner lock turn handle to this
position to Lock.
4. Rotary handle.
OUTER HANDLE
INNER HANDLE
4.2.1 OPERATING THE
INSPECTION DOOR
1. From the outside, insert key and turn
clockwise to lock and anti-clockwise
to unlock.
2. Once unlocked from the outside, turn the
handle anti-clockwise to open the door.
3. Open door fully until it engages with the
door keep.
4. To close from the outside, pull door away
from the door keep by pulling sharply at
the bottom of the door.
5. Ensure the inner turn handle isn't set
to the lock position and push the door
closed. Try to avoid slamming the door,
especially when a horse is present.
6. From the inside, turn the rotary
handle clock-wise so the handle points
to the arrow.
7. To close from the inside, pull the inner
handle towards you ensuring your fingers
are clear of the door and pull firmly.
8. Lock the door from the inside, by turning
the rotary handle anti-clockwise to the
closed padlock symbol.
23
Advertisement
Table of Contents
