Advertisement
Quick Links
READ AND SAVE THESE INSTRUCTIONS
Disconnect from power supply before performing maintenance procedures
such as cabinet cleaning, changing filters or servicing of electric motor or
other electric components
To reduce the risk of fire or electric shock, do not use this fan with any solid-
state speed control device.
For general ventilating use only. Do not use to exhaust hazardous or explosive
materials or vapors.
Use only a 10-Amp fuse.
Do not operate without having all filters in place.
Do not operate any fan with a damaged cord or plug. Discard fan or return to an
authorized service facility for examination and/or repair.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners or
similar coverings. Arrange cord away from traffic area and where it will not be
tripped over.
GS2-200
Air Filtration System
Operations Manual
WARNING:
WARNING:
WARNING:
WARNING:
CAUTION:
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Fumex GS2-200
Summary of Contents for Fumex GS2-200
- Page 1 GS2-200 Air Filtration System Operations Manual READ AND SAVE THESE INSTRUCTIONS WARNING: Disconnect from power supply before performing maintenance procedures such as cabinet cleaning, changing filters or servicing of electric motor or other electric components WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid- state speed control device.
-
Page 2: Getting Started
I n l e t h o s e a t t a c h m e n t The GS2-200 unit ships standard with a 1 x 2”, 2 x 2” or 1 x 3” inlet. Attach flex hose over the metal air inlet tube and tighten securely with the stainless-steel clamp. - Page 3 Blower/Fan The GS2-200 unit utilizes a variable speed blower with three speed settings. Press the up and down arrow buttons to increase/decrease blower speed. A green light next to the specific speed (Low, Med, or High) will indicate speed setting. In the case of a blower failure, all 3 blower speed lights will flash. To reset the blower’s internal thermal protection, disconnect the unit momentarily from its power source and reconnect.
- Page 4 Certain gases such as ketones can undergo oxidation or other chemical reactions that can liberate hazardous levels of heat in the presence of standard activated carbon. In the presence of such gases use only Fumex FX1K adsorbent to eliminate this hazard.
-
Page 5: General Maintenance
Remote Interface and Connectivity Function The GS2-200 unit can be supplied with an optional interface package providing remote start/stop and filter monitoring capabilities (Part # FA228). Please see instructions below for Relay Activation/De-Activation procedures and refer to the drawing in Figure 1 for remote connections. - Page 6 Fumex reserves the right to discontinue any item and to make changes in the specifications, terms and conditions or prices at any time without prior notice. Information furnished in the specifications is believed to be accurate and reliable at time of printing, however Fumex accepts no responsibility for product use, or the effect of future design or specification changes.
- Page 7 7. Now that the physical switch is activated and the unit is in the “Soft On” state, the software will need to be reprogramed via a flash drive with a configuration file and the USB port on the control board. (Contact Fumex to acquire the correct configuration file for your unit).
- Page 8 7. Now that the physical switch is activated and the unit is in the “Soft On” state, the software will need to be reprogramed via a flash drive with a configuration file and the USB port on the control board. (Contact Fumex to acquire the correct configuration file for your unit).
- Page 9 DRAWINGS AND FIGURES Figure 1...
- Page 10 DRAWINGS AND FIGURES Relay Activation Switch Figure 2 Figure 3...
Need help?
Do you have a question about the GS2-200 and is the answer not in the manual?
Questions and answers