Advertisement
9476 • Assembly Instructions for the 9476 Side Chair
ASSEMBLY ONLY REQUIRES AT LEAST 1 PERSON & INCLUDED HARDWARE
STEP 7: Take note of Seat (G) orientation before
placing it onto the Slats (I). There is a sticker that
clarifies which side is the front of the seat.
STEP 9: Insert Screws (C) into predrilled holes in
bottom of each Slat (I) and tighten.
Any problems or questions? Call Regency at 1-866-816-9822 or email customerservice@regencyof.com
STEP 8: Once the correct orientation is found,
place the Seat (G) onto the chair assembly with the
front side facing away from the seat back.
PLACE
DOWN
The completed assembly should look like this.
(Colors may vary based on purchased finsh)
Advertisement
