NN-DF383B
9. Disconnect connector from oven lamp and fan motor
terminals.
10. Take out the inverter reinforcement bracket A, inverter
bracket and H.V. Inventer as a whole unit from the oven
cavity.
11. Remove 2 screws holding H.V. Inverter on inverter bracket.
4.2.
Magnetron
1. Steps same as disassembly of H.V. Inverter step 1 to step
10.
2. Remove 1 screw holding thermistor on magnetron.
3. Remove 2 screws holding air guide A on oven cavity and
magnetron respectively.
4. Remove 2 screws holding air guide bracket on magnetron.
12