Chapter 4 Data Transmission; Introduction; Connected With Pc; Data Transmission - Newland DC850 Susu User Manual

Introduction

This chapter describes how to connect the DC850 to a PC and realize the data transmission.

Connected with PC

Open the "USB port protection rubber" at the bottom of the DC850, then connect the device with PC via the USB cable
included.

Data Transmission

USB Mode

Press "Systemset" in the System Menu-- "communication"--"USB", then it will display six USB modes: COM Download,
Ethernet, USB-VCOM, USB-HID, Flash Disk, MTP, please set the parameter per needs.

Ethernet Mode

Step 1: Press "Systemset" in the System Menu-- "services"--Select "FTP", then press "setup" to save the settings.
Step 2: Press "Systemset" in the System Menu-- "communication"-- "USB"--select "Ethernet" in the USB mode, then press
the "setup" to save the setting. After set successful, connect the DC850 with PC via USB cable.

Chapter 4 Data Transmission

22