Panasonic ES-RF41 Service Manual page 6

4.2. Caution in Assembly
NOTE:
When reassembling, replace the new waterproof seal. Make sure whether there is NO foreign substance sticking around a part
covered with waterproof seal.
1. Solder the lead wires with the module.
NOTE:
Make sure of the color of lead wires.
2. When inserting the module and chassis block into the
front panel, confirm if the module does not get any dam-
age or deformation.
3. Twist the lead wires and place them in the ribs.
4. Set the trimmer driving bar and the slit blade driving bar.
6