Overview Of The Components - Profi Care PC-TVL 3068 Instruction Manual

• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Do not immerse the appliance into water for cleaning. Please fol-
low the instructions as stipulated in the chapter "Cleaning".
Handling Batteries
Do not charge!
Do not disassemble!
Insert correctly!
Danger of explosion! Do not expose batter-
ies to intense heat, such as sunlight, fire or
similar.
Do not short circuit!
• Different battery types or new and used batteries must
not be used together.
• Batteries can leak and lose battery acid. If the remote
control is not used for a long period of time, remove the
batteries.
• If a battery leaks do not rub the liquid into your eyes or
mucous membranes. If hands come into contact with the
liquid they should be washed thoroughly and eyes rinsed
out with clear water; if symptoms persist please consult
a doctor.
Scope of Delivery
1 × Remote control
1 × Tower
1 × Base plate
3 × Screws for the base plate
1 × Battery for remote control CR2025
PC-TVL3068_IM

Overview of the Components

1 Remote control
2 Display
3 button
4 button
5 button
6 button
7 button
8 IR Receiver for remote control
9 Tower
10 Power cable
11 Base plate
Unpacking the Appliance
1. Remove the appliance from its packaging.
2. Remove all of the packaging material such as foils, filling
material, cable holders and cardboard packaging.
3. Check the scope of delivery.
NOTE:
There may still be dust or production residues on the
surface of the appliance. We recommend that you quickly
wipe off the housing with a damp cloth.
Assembly Instructions
1. Position the housing with the open side facing upwards.
NOTE:
It is best to place a blanket underneath so that the
housing is not damaged.
2. Pass the connection cable through the hole of the base
plate so that the mains plug is located on the underside
of the base plate.
29
13.08.19