EZ CONNECT EZ Pen Getting Started

Getting Started

What's in the box ?

Scroll Wheel & Button
Click the scroll wheel to switch
between pen and eraser functions.
Scroll the scroll wheel to adjust
pen nib and eraser thickness when
annotating, or to navigate up and
down when reviewing a document.
Pen Nib
Specially designed ergonomic pen nib .
•
Protective Cap
Remove the protective cap
from the charging and syncing
port before use.
EZ Pen Pen Nib x2
Mode Button
• Click the Mode Button to tab back and forth
between the OS UI and D3 annotation UI.
Additionally, press for more than 3 seconds
to access the home screen.
LED Indications
The LED indications on the EZ Pen
are as follows:
Blue : More than 50%
Logo
Magenta : More than 20%
Red : Below 20%

Checking Battery Status

Press and hold the scroll wheel for 3 seconds
to check the status of the battery .
• Blue : More than 50%
• Magenta : More than 20%
Red : Below 20%
•
Quick Manual & Warranty
Charging & Syncing Port
Insert the EZ Pen into the charging port on the
EZ Holder or EZ Buttons to begin charging or
to sync your EZ Pen.
Full Charge Time : MAX 2.5 hours
Continuous Uptime : Approximately 10 hours
Standby Time : Approximately 6 days
4 Colour Clicker
EZ Pen colour selection
•
(Red, Blue, White, Black)
Charging & Syncing
To recharge or sync your EZ pen, insert it (pen nib-up) into the
charging port on the EZ Holder or EZ Buttons . Please use the
LED indications on the EZ Buttons & EZ Holder to check the
sync and charge status.
Charging Syncing
Green : Charging complete Blue
Red : Charge in Progress Yellow : Sync Issue
Blue : Power On Magenta : Sync Issue
Tip: To sync the EZ Pen, place it into the charging port
for 3 seconds and then remove.

Pen Nib Replacement

Replace the pen Nib only when it is worn out.
2.5Hr Charge
10Hr Use
: Synced / Power On