4.3.2 KSD 100 Installation Procedures
DO NOT REMOVE THE PROTECTIVE FILM FROM THE DISPLAY GLASS UNTIL THE UNIT IS
INSTALLED.
(1) Prepare the KSD 100 for installation:
89000009-002
Rev 0
REF:
RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS
(a) Using the KSD 100 Mounting Hardware and Grip Installation Kit, install the Santoprene™
Grip by sliding the grip from the back of the KSD 100 and snapping it over the front edge
of the KSD 100 LCD mount.
Figure 4-9 KSD 100 Grip Installation (Sheet 1 of 2)
© Honeywell International Inc. Do not copy without express permission of Honeywell.
NOTE
KFD 900 AeroVue Touch AML STC Installation Manual
Page 4-7