1. Manuals
  2. Brands
  3. BENDIXKing Manuals
  4. Industrial Monitor
  5. KFD 900 AeroVue
  6. Manual

BENDIXKing KFD 900 AeroVue Manual

Touch primary flight display system aml stc document for part 23 aircraft
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS
Honeywell International, Inc.
9201-B San Mateo Blvd N.E.
Albuquerque, New Mexico 87113 USA.
CAGE: 6PC31
Telephone: 855-250-7027 (Toll Free U.S.A./Canada)
Telephone: 602-365-7027 (International Direct)
Website:
www.bendixking.com
KFD 900 AeroVue
Primary Flight Display System
The attached documents are distributed by BendixKing to provide technical
support for installation of the Honeywell International, Inc. KFD 900 AeroVue
Touch Primary Flight Display System using AML STC Number SA09902AC.
Export Control
This document contains technical data and is subject to U.S. export regulations. These commodities,
technology, or software were exported from the United States in accordance with the export administration
regulations. Diversion contrary to U.S. law is prohibited.
Publication Number D201907000025, Revision 000
© Honeywell International Inc. Do not copy without express permission of Honeywell.
AML STC Document
for Part 23 Aircraft
STC Number SA09902AC
ECCN: 7E994
TM
Touch
TM
Page T-1
Initial 25 Jul 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KFD 900 AeroVue and is the answer not in the manual?

Questions and answers

Summary of Contents for BENDIXKing KFD 900 AeroVue

  • Page 1 Part 23 Aircraft STC Number SA09902AC The attached documents are distributed by BendixKing to provide technical support for installation of the Honeywell International, Inc. KFD 900 AeroVue Touch Primary Flight Display System using AML STC Number SA09902AC. Export Control This document contains technical data and is subject to U.S.
  • Page 2 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS DOCUMENT REVISIONS Revision Description of Change DATE Initial release 25 JUL 2019 Publication Number D201907000025, Revision 000 Page T-2 Initial 25 Jul 2019 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 3 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS TABLE OF CONTENTS AML-STC SA09902AC Permission Letter, July 22, 2019 ........Page 4 FAA Supplemental Type Certificate (STC) SA09902AC, July 10, 2019 .... Page 5 FAA Approved Model List (AML), July 10, 2019 ..........Page 6 Master Drawing List (MDL), Rev B, July 2, 2019 ..........
  • Page 4 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS...
  • Page 5 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS...
  • Page 6 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS...
  • Page 7 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS...
  • Page 8 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 MASTER DRAWING LIST P/N 89000009-009 Supplemental Type Certificate Between the FEDERAL AVIATION ADMINISTRATION BendixKing for the KFD 900 Primary Flight Display System STC Project No. ST02510AC-A Prepared by: Honeywell International, Inc.
  • Page 9 Honeywell Incorporated, Inc. All Rights Reserved. Copyright © 2019 Honeywell International, Inc. BendixKing and the BENDIXKING logo are registered trademarks of Honeywell International Inc., U.S. Patent & Trademark Office. This document is managed prior to release using Subversion in the KFD-900 work set.
  • Page 10 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS 89000009-009 Rev KFD 900 Master Drawing List TABLE OF CONTENTS Purpose ........................... 1 Master Drawing/Document List (MDL) ................. 2 Installation Data List ........................2 KFD 900 Master Drawing/Document List ..................2 Revision History Revision Comments...
  • Page 11 KFD 900 Master Drawing List 1 PURPOSE This Master Drawing List is for the BendixKing KFD 900 System, STC Project Number ST02510AC-A. Section 2 lists all applicable drawings and documents that support the installation, and type design of the KFD 900 System.
  • Page 12 Note 2 – Initial Company release was Rev 0-C, FAA approved release Rev 0 is the same as Rev 0-C. KFD 900 Master Drawing/Document List Data maintained by BendixKing and available to the FAA to support type design and STC compliance, production inspection, design change reviews, and any reason deemed necessary by the FAA.
  • Page 13 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS REF:...
  • Page 14 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 LOG OF REVISIONS PAGES REVISION NO. DESCRIPTION DATE AFFECTED APPROVED Initial Release 07/01/2019 07/01/2019 FAA Approved Date: 07/01/2019 REF:...

  • Page 15: Table Of Contents

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table of Contents Section Page 1 GENERAL ......... 1-1 1.1 Overview ..................
  • Page 16 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table of Contents (cont) Section Page 4.3.1 Terrain Alert Inhibit ..............4-2 4.3.2 Clean Touch Screen/IR Bar ............4-2 4.4 Navigation Data................

  • Page 17: General

    KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 1 GENERAL 1.1 OVERVIEW The KFD 900 AeroVue Touch flight deck is a panel-mounted touch- controlled Primary Flight Display (PFD) and Multifunction Display (MFD) system. The KFD 900 AeroVue Touch has the following installed equipment/features:...
  • Page 18 KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 The following table shows installed equipment integrated with the KFD 900 AeroVue Touch: Table 1-2 Installed Equipment Integrated with the KFD 900 AeroVue Touch EQUIPMENT CONNECTED CONNECTED INSTALLED...

  • Page 19: Acronyms And Abbreviations

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 The following labels are used for the circuit breakers: Table 1-4 Circuit Breaker Labels LABEL ASSOCIATED EQUIPMENT KSD 100 and KCP 100...
  • Page 20 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 TERM DEFINITION Course Deviation Indicator Course CVFP Charted Visual Flight Procedures d-CS Digital Chart Supplement Departure Deviation Dimming Distance Measuring Equipment...
  • Page 21 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 TERM DEFINITION Instrument Landing System Instrument Meteorological Condition INOP Inoperable Infrared KOEL Kinds of Equipment List Knots Liquid Crystal Display...
  • Page 22 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 TERM DEFINITION Primary Flight Display Pilot In Command Position Reg. Registration Required Ser. Serial Serial Peripheral Interface STAR Standard Terminal Arrival...
  • Page 23 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 TERM DEFINITION Visual Separation on Approach Vertical Situation Display WAAS Wide Area Augmentation System Wi-Fi Wireless Fidelity WUXGA Widescreen Ultra Extended Graphics Array...

  • Page 24: Limitations

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 2 LIMITATIONS 2.1 MOVING MAP DISPLAY 1. The moving map display is not a substitute for approved maps or charts required by the operating rules.

  • Page 25: Air Data Attitude Heading Reference System (Adahrs)

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 10. When Relative Terrain is selected, bodies of water are shown in the relative terrain colors only when Topography is off.

  • Page 26: Vertical Situation Display (Vsd)

    5. Not all terrain or obstacle features are displayed on the VSD. 2.6 ADS-B IN TRAFFIC 1. The KFD 900 AeroVue Touch ADS-B In traffic system does not relieve the flight crew of the responsibility to see and avoid traffic.

  • Page 27: Fis-B Weather

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 b. The ADS-B In system does not account for all targets outside radar coverage or ground station coverage. 2.7 FIS-B WEATHER 1.

  • Page 28: Usb

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 availability is subject to the range limits of the broadcast of these products. NOTE: FIS-B uplink is not an FAA approved source for NOTAMs.

  • Page 29: Kinds Of Operation Equipment List (Koel)

    2.11 KINDS OF OPERATION EQUIPMENT LIST (KOEL) 1. A placard located on the flight deck establishes if the airplane is limited to day or night VFR operations. Installation of the KFD 900 AeroVue Touch does not change the limitations on this placard. Otherwise, the KFD 900 AeroVue Touch equipment in a certified airplane is approved for IFR operations.

  • Page 30: Emergency And Abnormal Procedures

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 3 EMERGENCY AND ABNORMAL PROCEDURES 3.1 EMERGENCY PROCEDURES None. 3.2 ABNORMAL PROCEDURES 3.2.1 KFD 900 AEROVUE TOUCH FAILURE If the KFD 900 AeroVue Touch fails: 1.

  • Page 31: Adahrs System Reset

    4. ADAHRS circuit breaker ......Reset 3.3 WARNINGS, CAUTIONS, AND MESSAGES The KFD 900 AeroVue Touch displays several warnings, cautions, and messages. Crew Alerting System (CAS) messages flash for about 10 seconds or until acknowledged through a touch gesture; flashing stops after touch gesture is made or 10 seconds, whichever occurs first.

  • Page 32: Warnings

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 3.3.1 WARNINGS The following table shows the system warning messages: Table 3-1 Warnings - Red IMPACT WARNING ALERTS TERRAIN...
  • Page 33 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-1 Warnings - Red ADAHRS FAILURE ALERTS Alert Action ATTITUDE FAIL Use the standby attitude indicator Attitude failure. The following elements appear: •...
  • Page 34 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-1 Warnings - Red ADAHRS FAILURE ALERTS Alert Action AIRSPEED FAIL Use the standby airspeed indicator Computed airspeed failure. The following elements appear: •...
  • Page 35 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-1 Warnings - Red OTHER WARNING ALERTS Alert Action VERTICAL SPEED FAIL Use the standby vertical speed indicator Altitude rate failure or rate is out of range ±5500.

  • Page 36: Cautions

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 3.3.2 CAUTIONS The following table shows the system caution messages: Table 3-2 Cautions - Amber IMPACT CAUTION ALERTS TERRAIN...
  • Page 37 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-2 Cautions - Amber OTHER CAUTION ALERTS Alert Action ATTITUDE ALIGNING Fly by reference to standby flight instruments or the visible horizon Maintain wings level (limit airplane to ±5°...
  • Page 38 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-2 Cautions - Amber OTHER CAUTION ALERTS Alert Action TERR ALRT INHB Turn on the terrain warning system, if...
  • Page 39 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-2 Cautions - Amber OTHER CAUTION ALERTS Alert Action A/P NAV INOP Do not use the autopilot NAV or APPR...

  • Page 40: Advisory Messages

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 3.3.3 ADVISORY MESSAGES The following table shows the system advisory messages: Table 3-3 Advisory Messages Message Action KCP FAIL...
  • Page 41 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-3 Advisory Messages Message Action VLOC 3 FAIL Use alternate source for navigation Loss of communication with VLOC 3 AHRS IN-MOTION ALIGNMENT Maintain wings level (limit airplane to ±5°...
  • Page 42 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-3 Advisory Messages Message Action LIGHT SENSOR FAULT MANUAL DIM REQ Use the manual dimming control Communication failure with ambient...
  • Page 43 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-3 Advisory Messages AHRS ALIGNING - DO NOT TAXI Remain stationary until message disappears while the ADAHRS system aligns...

  • Page 44: Advisory Messages - Maintenance

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 3.3.4 ADVISORY MESSAGES - MAINTENANCE The following table shows the system advisory messages that provide root cause information associated with the simultaneously displayed...
  • Page 45 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 3-4 Advisory Messages - Maintenance Message Action APM BACKUP FAULT APM module has failed No pilot action required. Contact...

  • Page 46: Normal Procedures

    Database installed is invalid for today NOTE: These messages appear only after the GPS has linked to the KFD 900 AeroVue Touch. Otherwise, the pilot must determine if the database cycle is current using the validity dates that appear below the database names.

  • Page 47: Touch Screen Calibration

    For more detailed calibration instructions, refer to the KFD 900 AeroVue Touch Pilot’s Guide. 4.2.4 CROSS-COCKPIT OPERATION If cross-cockpit operation of the KFD 900 AeroVue Touch is required by the Pilot In Command (PIC), conduct the following: Confirm the KFD 900 AeroVue Touch installation meets the installation requirements for cross-cockpit usage (refer to Section 1.1) ..........

  • Page 48: Navigation Data

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 4.4 NAVIGATION DATA 4.4.1 DISPLAY OF DEVIATION Display of lateral deviation is provided using the course pointer in the center of the compass.
  • Page 49 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 • Red GPS fail warning is displayed, on right side of the compass, AND advisory message “GPS X FAIL” is generated in the Advisory message list when GPS communication is lost.

  • Page 50: Performance

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 5 PERFORMANCE No change. FAA Approved Date: 07/01/2019 REF:...

  • Page 51: Loading

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 6 LOADING No change. FAA Approved Date: 07/01/2019 REF:...

  • Page 52: Airplane And System Description

    KTP 73 OAT Probe Integrated Adjacent Systems (GPS, Navigator, KG 71 ADAHRS Weather, etc.) KMG 7010 Magnetometer Figure 7-1 KFD 900 AeroVue Touch System Diagram For a detailed description of the system, refer to the KFD 900 AeroVue Touch Pilot’s Guide. REF:...

  • Page 53: Control Philosophy

    P/N 89800009-004 Rev 0 7.2 CONTROL PHILOSOPHY 1. Except for the controls on the KCP 100, the KFD 900 AeroVue Touch is controlled by the KSD 100 touch display. Touch zones are indicated by a white border around a control legend. Airport and TFR more information on MFD maps can be accessed by touching the symbol for that data.
  • Page 54 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 4. Most dialogue boxes close automatically after 9 seconds of inactivity. NOTE: The dialogue boxes that do not time out are: A numeric...

  • Page 55: Color Philosophy

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 7.3 COLOR PHILOSOPHY The KFD 900 AeroVue Touch uses the following color philosophy: Table 7-1 Color Philosophy COLOR USE PHILOSOPHY...
  • Page 56 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 7-1 Color Philosophy COLOR USE PHILOSOPHY EXAMPLES EXCEPTIONS Cyan • Bug, readout, and • Altitude • Bearing pointer indicator label •...

  • Page 57: Touch Screen

    P/N 89800009-004 Rev 0 7.4 TOUCH SCREEN 1. The KFD 900 AeroVue Touch IR touch screen detects touch using an invisible curtain of light beams projecting downward from the top of the display. The Iight beam curtain is located approximately 1/10 inch above the display surface.

  • Page 58: Screen Cleaning

    VSD. The GPS selection in the GPS navigation parameters field (to the right of the HSI) indicates which GPS is being used by the KFD 900 AeroVue Touch. 7.7 SVS 1. SVS displays a synthetic image of the view outside the airplane on the PFD.
  • Page 59 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 airplane’s longitudinal axis. North/South and East/West oriented grid lines and range markers give a sense of motion and altitude to the image.
  • Page 60 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Runway Figure 7-5 Example of View Out the Windshield 2. When the SVS Zero Pitch Reference Line (ZPRL) or FPS are not conformal with the outside view, they are dashed.

  • Page 61: Utc/Timer

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 combined 6 arc-second cells is used. Elevation units are feet at a vertical resolution of ≤50 ft. 5. If the GPS position is unavailable, an amber “SVS FAIL” CAS message appears and a smaller SVS pitch scale is displayed on the AI.

  • Page 62: Map Information Displayed

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 7.12.1 MAP INFORMATION DISPLAYED 1. Information displayed on the Base and Wx Maps depends on the overlays selected, map setup, map range, map detail level setting (declutter control position), and ownship altitude.
  • Page 63 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Figure 7-6 Map Detail Level Menu Examples 6. Table 7-2 describes the different Base Map Detail levels and data that...
  • Page 64 KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 8. Table 7-4 shows map data that can be displayed on the Base Map (Map Detail setting and range specified are when data appears): Table 7-4 Map Items Display Control...
  • Page 65 KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 7-4 Map Items Display Control BASE MAP DATA DESCRIPTION MEANS OF CONTROL Overlay Setup Map Detail Ownship Selection Selection Setting Range Altitude Aeronautical On/Off Airports Symbol and International Civil Aviation Organization (ICAO)
  • Page 66 KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 7-4 Map Items Display Control BASE MAP DATA DESCRIPTION MEANS OF CONTROL Overlay Setup Map Detail Ownship Selection Selection Setting Range Altitude Relative Terrain (and Yellow or red shaded obstacles and terrain (or dark or light...

  • Page 67: Map Auto Range

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 7.12.2 MAP AUTO RANGE The Auto Range function is presented, but can only be selected when a flight plan is available.

  • Page 68: Chart Panning

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 7.13.1 CHART PANNING 1. Swiping more than 75% of a chart selects another chart. Arrows indicate if a new chart is available to be selected. When a new chart is selected, “New Chart Data”...

  • Page 69: Nexrad

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 2. When using the “As Issued” condition on the airport diagram, it is possible to pan the airport diagram so that it is removed from view. It is also possible for the ownship to move out of view.

  • Page 70: Terrain And Obstacle Alerts

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 7.15 TERRAIN AND OBSTACLE ALERTS 1. When a terrain or obstacle alert occurs and the MFD is selected, the MFD automatically changes to a track up Terrain Map at 2.5 NM range.
  • Page 71 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 4. The terrain/obstacle alert provides a caution alert when within 60 seconds of impact with terrain/obstacle. 5. The terrain/obstacle alert provides a warning alert when within 30 seconds of impact with terrain/obstacle.

  • Page 72: Relative Terrain

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Figure 7-10 Threat Alert Auto Suppression Regions 8. The obstacle alerting includes the airport area. Obstacles 0.2 NM (1200 ft) left or right of the airplane track are candidates for obstacle alert.

  • Page 73: Traffic

    Terrain Water 7.17 TRAFFIC 1. The KFD 900 AeroVue Touch traffic system is a basic AIRB application as described in Advisory Circular (AC) 20-172B, paragraph 2-3 b. Traffic alerting is not provided. The traffic information assists the flight crew 7-22...

  • Page 74: Flight Plan

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 in visually acquiring traffic out the window while airborne. This application improves both safety and efficiency by providing the flight crew with enhanced traffic awareness.

  • Page 75: Adahrs

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 2. The VSD shows a forward-looking narrow slice of terrain along the airplane track. Terrain slightly to the left or right of the airplane track is not depicted on the VSD.

  • Page 76: Databases

    KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 7.22 DATABASES The KFD 900 AeroVue Touch includes onboard databases that contain data for SVS, moving map, VSD, terrain alerts, and charts: Table 7-7 Databases UPDATE CYCLE DATABASE...
  • Page 77 KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 Table 7-7 Databases UPDATE CYCLE DATABASE DATA TYPE USED IN PROVIDER COMMENTS (DAYS) Instrument 1. Published Digital Terminal Procedures including: Charts Procedure a. Instrument Approach Procedure (IAP) Charts, geo-referenced...

  • Page 78: Handling, Service, And Maintenance

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 8 HANDLING, SERVICE, AND MAINTENANCE 8.1 SCREEN CLEANING CAUTION: The display screen glass has an optical coating that is easily damaged.

  • Page 79: Ir Bar Cleaning

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS KFD 900 AeroVue Touch Airplane Flight Manual Supplement P/N 89800009-004 Rev 0 c. Wipe off any moisture that remains with a clean, lint-free anti- static cloth. 8.2 IR BAR CLEANING The IR bar is located at the top edge of the screen. The IR bar is made of polycarbonate and can be easily damaged.
  • Page 80 9201-B San Mateo Blvd N.E. Albuquerque, New Mexico 87113 U.S.A. Telephone: 855-250-7027 (Toll Free U.S.A./Canada) Telephone: 602-365-7027 (International Direct) KFD 900 AEROVUE TOUCH PRIMARY FLIGHT DISPLAY SYSTEM AML STC INSTALLATION MANUAL Document P/N 89000009-002 Rev 0 July 2019 Export Control This document contains technical data and is subject to U.S.
  • Page 81 Honeywell. You agree to take all reasonable efforts to maintain the confidentiality of these Materials. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 82 Honeywell and may only be modified by a writing duly executed by the duly authorized representatives of the parties. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-2 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 83 OF THE COMPONENTS. INCORRECTLY FABRICATED SPECIAL TOOLING OR TEST EQUIPMENT CAN RESULT IN DAMAGE TO THE PRODUCT COMPONENTS OR GIVE UNSATISFACTORY RESULTS. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-3 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 84 3. Changes to this manual are provided to users who have registered via the website to receive updates. BendixKing Customer Support If you need to speak to personnel about Technical matters, the BendixKing Customer Support team provides 24/7 customer service. • Telephone: 855-250-7027 (Toll Free U.S.A./Canada) •...
  • Page 85 Revision Revision Date Description July 3, 2019 Initial release 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-5 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 86 3 KFD 900 SYSTEM INSTALLATION OVERVIEW ..........3-1 3.1 Pre-Installation Checklist........................3-3 3.2 Available Equipment .......................... 3-4 3.3 Installation Materials.......................... 3-5 3.3.1 Accessories and Support Equipment Available from BendixKing............ 3-7 3.3.2 Materials Required but Not Supplied....................3-7 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual...
  • Page 87 3.13.3 Autopilot Interface ........................3-29 3.13.3.1 Autopilot Attitude Indicators/Gyros ..................3-30 3.13.3.2 Autopilot Turn Coordinators ....................3-30 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-2 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 88 6.2.1 System Configuration Setup......................6-8 6.2.1.1 Lighting ............................6-9 6.2.1.2 External Dimming ......................... 6-9 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-3 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 89 7.2.5 Airspeed Display and Standby Airspeed Indicator Checkout ............7-4 7.2.6 Outside Air Temperature Checkout ....................7-5 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-4 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 90 9.2.2.2 Scheduled Maintenance Checks....................9-1 9.2.3 Control and Operating Information ....................9-1 9.2.4 Unscheduled Maintenance ......................9-1 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-5 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 91 APPENDIX A OUTLINE AND INSTALLATION DRAWINGS........A-1 APPENDIX B INTERCONNECT DIAGRAMS............B-1 APPENDIX C KFD 900 SYSTEM INSTALLATION WORKSHEET......C-1 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-6 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 92 Figure 6-10 External Dimming Calibration Sub-Menu..............6-9 Figure 6-11 Minimum Brightness Level..................6-10 Figure 6-12 Maximum Brightness Levels.................. 6-11 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 93 Figure 6-56 KMG 7010 Calibration Reading ................6-52 Figure 6-57 Completion of Magnetometer Calibration............6-53 Figure 7-1 KSD 100 Screen......................7-1 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-2 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 94 Figure 7-45 Software Loading Pop-Up Window (Power Cycle) ..........7-33 Figure 7-46 Restore Data to APM..................... 7-33 Figure 8-1 Screen Maint Menu....................8-7 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-3 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 95 Figure C-2 KFD 900 System Components and Cable Routing (Side View) ........C-3 Figure C-3 KFD 900 System Circuit Breakers and Switch Locations..........C-3 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-4 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 96 Table 5-2 KSD 100 J2 Pin Descriptions (Viewed from LRU) ............5-3 Table 5-3 KCP 100 J1 Pin Descriptions (Viewed from LRU) ............5-6 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 97 Table C-1 KFD 900 System Component Locations...............C-1 Table C-2 Electrical Load Analysis - Normal Operating Conditions ..........C-4 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page T-2 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 98: Introduction

    Handle the items susceptible to electrostatic discharge in accordance with MIL-HDBK-263. Refer to MIL- STD-1686 for definition of the standards and conditions. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 1-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 99: References

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS 1.2 References 1.2.1 BendixKing/Vendor Publications The publications listed in Table 1-1 are BendixKing/Vendor references. Check for latest version of publication. Table 1-1 BendixKing/Vendor References Document Number Description D201707000026 KFD 900 AeroVue Touch Pilot’s Guide...

  • Page 100: Acronyms And Abbreviations

    AHRS Attitude and Heading Reference System Attitude Indicator Altitude Approved Model List Amdt Amendment 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 1-3 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 101 Central Processing Unit Course Design Assurance Level Direct Current Deviation DIGO Discrete Input Ground/Open 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 1-4 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 102 Identification International Electrotechnical Commission IEEE Institute of Electrical and Electronics Engineers Integrated Flight Display 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 1-5 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 103 Non-Volatile Memory Outside Air Temperature Primary Flight Display PBIT Power-up Built-in Test Personal Computer 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 1-6 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 104 TIS-B Traffic Information Service-Broadcast Technical Standard Order Transmit Universal Access Transceiver Universal Serial Bus 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 1-7 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 105: Terminology

    Non-metallic aircraft refers to all other aircraft, fiberglass or composite skin and aircraft with tube and fabric construction. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 1-8 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 106: General Information

    KFD 900. Data provided in this manual may be used to support an alteration, but any deviations will require additional FAA approval. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-1 ©...

  • Page 107: Kfd 900 Overview

    Course Deviations. Additionally, the KSD 100 has the capability to display Moving Map, VFR Sectional and IFR charts, Instrument Procedures charts, Synthetic Vision, and ADS-B Traffic and Weather. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-2 ©...

  • Page 108: Ksd 100 Primary Flight Display

    KMG 7010 Magnetometer and the KTP 73 OAT Probe and connection with a WAAS GPS source. Only the GPS units identified in this install manual will be authorized to provide inputs to the KG 71. The approved WAAS GPS sources include the BendixKing KSN series, the Garmin GNS-W and GTN series (only 89000009-002...

  • Page 109: Kmg 7010 Magnetometer

    Total air temperature is used to calculate the OAT and is required for the true airspeed calculation. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-4 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 110: Technical Specifications

    Convection cooled (does not required forced air cooling within the unit operational temperature range) Connectors Male 9-pin D-Sub 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-5 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 111: Table 2-4 Kg 71 Adahrs Specifications

    Turn Rate Output Range ±128 Degrees/Second Max Pitch/Roll/Yaw Rate ± 245 deg/sec Max Sustained G ± 4g 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-6 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 112: Table 2-6 Kmg 7010 Magnetometer Specifications

    5 ft. 3-conductor shielded wire lead, spliced into AC wiring harness. Certifications TSO-C106 (Incomplete) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-7 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 113: Environmental Qualification Form (Eqf)

    Lightning Direct Effects 24.0 Icing 25.0 Electrostatic Discharge 26.0 Fire, Flammability (See Note 3) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-8 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 114 Cat D 8 - 12 GHz Cat D 12 - 18 GHz Cat D 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-9 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 115: Table 2-9 Kcp 100 Environmental Qualification Form (Eqf)

    23.0 Lightning Direct Effects 24.0 Icing 25.0 Electrostatic Discharge 26.0 Flammability (See Note 3) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-10 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 116 Cat D 8 - 12 GHz Cat D 12 - 18 GHz Cat D 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-11 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 117: Table 2-10 Kg 71 Environmental Qualification Form (Eqf)

    23.0 Lightning Direct Effects 24.0 Icing 25.0 Electrostatic Discharge 26.0 Flammability (See Note 3) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-12 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 118 Cat D 7. The Outside Air Temperature (OAT) parameter was tested to DO-160G Category R for both (CS) and (RS). 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-13 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 119: Table 2-11 Kmg 7010 Environmental Qualification Form (Eqf)

    Conducted) 21.0 Emission or Radio Frequency Energy 22.0 Lightning Induced Transient Susceptibility A4J33 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-14 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 120 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-15 ©...

  • Page 121: Table 2-12 Ktp 73 Environmental Qualification Form (Eqf)

    23.0 Lightning Direct Effects XX2A 24.0 Icing 25.0 Electrostatic Discharge 26.0 Flammability Analysis Only 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-16 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 122: Regulatory Compliance

    PMA - following KFD 900 STC Approval Computer KTP 73 Temperature Probe TSO-C106 INCOMP KMG 7010 Direction Instrument, Magnetic TSO-C6d/ETSO-C6d 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-17 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 123: Databases

    Runways depictions are further detailed with a runway identifier, centerline, threshold markings, and 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-18 ©...

  • Page 124: Required Standby Instruments

    (7) Installation of dual independent electrical systems or a standby (emergency) battery is not authorized by this STC. Separate installation approval is required for this type of installation. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-19 ©...

  • Page 125: Figure 2-3 Standby Instrument Power Requirements

    Bus by Load Than 30 Minutes Analysis Complete Figure 2-3 Standby Instrument Power Requirements 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 2-20 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 126: Stc Permission

    2.13 Repair and Return Refer to the troubleshooting instructions in Section 8 Troubleshooting. If repair is necessary, the unit must be sent to a BendixKing certificated repair facility. The KFD 900 System components are not field repairable. For information on returning a unit, contact BendixKing support.

  • Page 127: Kfd 900 System Installation Overview

    SERVICE TECHNICIANS MUST OBEY STANDARD SAFETY PRECAUTIONS, SUCH AS WEARING SAFETY GLASSES, TO PREVENT PERSONAL INJURY WHILE INSTALLING OR PERFORMING SERVICE ON THIS UNIT. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 128 TO KEEP RISK OF DAMAGE TO A MINIMUM WHEN REMOVING, SERVICING, OR HANDLING THE EQUIPMENT. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-2 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 129: Pre-Installation Checklist

    Section 3.6.7.1 KG 71 Location Acceptable location for the KTP 73 OAT. Section 3.6.9.1 KTP 73 Location 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-3 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 130: Available Equipment

    KSD 100 Backshell Assembly Install Kit 89000020-002 KSD 100 Configuration Module & Connectors Install Kit 89000020-003 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-4 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 131: Installation Materials

    Connector Contact Crimp Pin Size 22 53501676-2 78-pin D-Sub Female Connector 53504891-1 Connector Contact Crimp Socket Size 22 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-5 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 132: Table 3-5 Installation Kit, Mounting Hardware And Grip - Ksd 100, Pn 89000020-007

    001-01299-0000 Instruction For Harness Assembly Parts 010-00068-0002 Crimp Terminal 4S 030-01157-0011 Socket Crimp 20G 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-6 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 133: Accessories And Support Equipment Available From Bendixking

    #4, 6, 8, 10, ¼ inch Ring Terminals MS25036-XXX As Required XXX = Size 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-7 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 134 Pressure vessel mounting sealant, PS MIL-PRF-81733D As Required 870B-1/2 Thread-locking compound Commercially As Required Available 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-8 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 135: Tools Required But Not Supplied

    M81969/1-04 Green and White Metal Insert/Removal Tools AFM8 Crimp Tool M22520/2-01 Crimper Turret Head, Positioner M22520/2-09 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-9 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 136: Unpacking And Inspection

    Table 3-2, for the appropriate part lists. Inspect all components for any damage, contact BendixKing Customer Support if any parts are missing or damaged. The shipping container and all packing materials must be retained in the event that storage or reshipment of the equipment is necessary.

  • Page 137: Discrete I/O

    Table 3-18 KSD 100 Discrete Output 5V/Open (DO5VO) States State Voltage Level Active 5 VDC Inactive Open Circuit 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-11 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 138: Serial I/O

    EMI noise generating sources. The location consideration for each of the KFD 900 System components is described in this section. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-12 ©...

  • Page 139: Kfd 900 System Interfaces

    The KFD 900 System components can interface with a variety of other avionics equipment. The following list includes the proven interfaces. There may be other devices that can be configured the same as the ones listed below but have not been tested by BendixKing and are not in compliance with this STC. 89000009-002...

  • Page 140: Table 3-20 Kfd 900 Compatible Equipment

    GPS 500W GTN 625 GTN 635 GTN 725 Avidyne IFD 410 IFD 510 IFD 545 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-14 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 141 FDL-978-XVRD/G ADAHRS BendixKing KG 71 Magnetometer BendixKing KMG 7010 OAT Probe BendixKing KTP 73 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-15 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 142: Instrument Panel

    The KFD 900 system equipment dimensions and installation templates are provided in Appendix A Outline and Installation Drawings. Refer to AC 43.13-1B for edge distance guidance. For KSD 100 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-16 ©...

  • Page 143: Standby Instruments

    Appendix A Outline and Installation Drawings. NOTE CERTAIN MODELS MAY REQUIRE A MOUNTING ADAPTER TO ACHIEVE THE MINIMUM MOUNTING HOLE TO CUTOUT DISTANCE, PLEASE CONTACT BENDIXKING CUSTOMER SUPPORT FOR ASSISTANCE. 3.6.3 Standby Instruments The KFD 900 System requires a standby attitude indicator, airspeed indicator, and altimeter be installed.

  • Page 144: Standby Airspeed Indicator

    The location must allow for the KSD 100 display to be viewed without being obstructed by the glareshield or the control column and yoke. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-18 ©...

  • Page 145: Figure 3-3 Ksd 100 Primary Field Of View

    AI display overlaps the original type certificated “AI” location. The AI area is in the top half of the KSD 100 display as illustrated in Figure 3-4. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-19 ©...

  • Page 146: Ksd 100 Cooling Considerations

    The KCP 100 can only be installed in the orientation that it was designed for (portrait or landscape). 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-20 ©...

  • Page 147: Kg 71 Installation Considerations

    ) AND SETUP ON THE KSD. Use the dimensions shown in Figure A-7 to prepare the mounting holes for the KG 71 (also refer to the 1:1 scale drawing - available for download on the BendixKing Website - Dealer Portal). 3.6.7.2 KG 71 Orientation...

  • Page 148: Figure 3-5 Supported Kg 71 Installation Orientations

    A higher error will impact attitude accuracy output primarily under high pitch or roll angle conditions. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-22 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 149: Kg 71 Cooling Considerations

    NOTE IF A LEGACY BENDIXKING COMPASS SYSTEM, SUCH AS THE KCS 55A, IS REPLACED BY THE KFD 900 SYSTEM, THE EXISTING WIRING FOR FLUX VALVE DETECTOR, KMT 112, MAY BE REUSED IF THE EXISTING WIRING MEETS THE SAME SHIELDING AND EMI TERMINATION REQUIREMENTS FOR THE KMG 7010.

  • Page 150: Magnetic Interference

    Alternately, relocation of the magnetometer may be required. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-24 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 151: Ktp 73 Installation Considerations

    The sensor tip should extend out of the airplane structure sufficient to extend the tip into the free-stream. Ensure adequate space for sensor lead cable routing is available. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-25 ©...

  • Page 152: Placards And Labels

    • “PFD” for the KSD 100 and KCP 100 • “ADAHRS” for the KG 71 • “MAG” for the KMG 7010 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-26 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 153: Power Distribution

    (1) Wire size for the KSD 100, KCP 100, KG 71, and KMG 7010: (a) For power and signaling lines, use 22 AWG minimum 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-27 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 154: Shield Termination

    AC 43.13-1B. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-28 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 155: Pitot-Static Plumbing Considerations

    3.13.3 Autopilot Interface The KFD 900 System is able to interface with a variety of autopilots. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-29 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 156: Autopilot Attitude Indicators/Gyros

    The audio panel must have an un-switched audio-in available. 3.14 Part 121/Part 135 Considerations Not Applicable. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 3-30 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 157: Kfd 900 System Installation Procedures

    Dimensions (also refer to the 1:1 scale drawing and associated electronic format .dxf template - available for download on the BendixKing Website - Dealer Portal). (3) Cut the panel for the KCP 100 using the template provided in Figure A-5 KCP 100 Panel Cutout Dimensions (also refer to the 1:1 scale drawing and associated electronic format .dxf template -...

  • Page 158: Ksd 100 Installation

    Figure 4-1. Each 78-pin D-sub connector housing, provided in the KSD 100 Installation Kit - Configuration Module And Connectors, is mounted inside a BendixKing Backshell Assembly, provided in the KSD 100 Installation Kit - Backshell Assembly. See Figure 4-2 for exploded view diagram and part number references of the backshell assembly.

  • Page 159: J1 Connector Assembly

    Module and Connectors: (1) Prepare the J1 wire harness by stripping wire ends and applying crimped pin connector contacts. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-3 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 160: J2 Connector / Configuration Module Assembly

    KSD 100. The Configuration Module CCA is installed in the backshell assembly of the J2 connector. See Figure 4-2 BendixKing Backshell Assembly, Figure 4-4 KSD 100 J2 Connector Assembly, and Figure 4-5 Configuration Module Circuit Card Assembly (Primary Side) for exploded view diagrams and part number references.

  • Page 161: Figure 4-6 Configuration Module Inside J2 Backshell

    SOLDER JOINTS DO NOT PROTRUDE MORE THAN 0.080 INCHES FROM THE CARD SURFACE (PRIMARY SIDE). 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-5 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 162: Figure 4-7 Wired Configuration Module Circuit Card Assembly

    Torque screw to 4 ± 0.4 in-lbs (0.45 ± 0.05 Nm). Figure 4-8 Bottom Side of J2 Backshell 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-6 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 163: Ksd 100 Installation Procedures

    KSD 100 LCD mount. Figure 4-9 KSD 100 Grip Installation (Sheet 1 of 2) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-7 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 164: Figure 4-10 Ksd 100 Grip Installation (Sheet 2 Of 2)

    STUD. USE OF THE GROUND STUD IS NOT REQUIRED IF THE UNIT IS ALREADY GROUNDED (RESISTANCE OF NO MORE THAN 2.5 MILLIOHMS) TO THE INSTRUMENT PANEL/ AIRFRAME. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-8 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 165: Ksd 100 Installation Unit Verification

    Complete the KSD 100 System Configuration procedure in Section 6.2 prior to executing post installation checkout documented in Section 7. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-9 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 166: Kcp 100 Installation

    (7) Verify the electrical bond between the KCP 100 and the instrument panel conforms to the guidelines listed in Section 3.10 Electrical Bonding Considerations. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-10 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 167: Kcp 100 Center Stack Installation Procedures

    Complete the KCP 100 Control Panel lighting configuration in Section 6.2.1.1 prior to executing post installation checkout in Section 7.2.11 KCP 100 Checkout. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-11 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 168: Kg 71 Installation

    (3.16 ± 0.32 Nm). See Figure 4-14. Figure 4-14 KG 71 ADAHRS Installation Diagram 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-12 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 169: Kg 71 Post Installation Unit Verification

    Perform the following procedures of this manual to configure the KG 71: (1) Section 6.3 KG 71 Configuration (ADAHRS) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-13 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 170: Kmg 7010 Installation

    (7) Install mounting adapter plate (as applicable). (8) Using the KMG 7010 Installation Kit, mount the KMG 7010 with the four #10-32 mounting screws, 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-14 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 171: Figure 4-17 Kmg 7010 Magnetometer Installation Diagram

    10.0 milliohms. Figure 4-17 KMG 7010 Magnetometer Installation Diagram 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-15 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 172: Kmg 7010 - Post Installation Unit Verification

    (2) At the selected location for the KTP 73 locate and drill four mounting holes and center hole in airplane skin shown in Figure A-11 KTP 73 Mounting Hole Pattern (also refer to the 1:1 scale drawing - available for download on the BendixKing Website - Dealer Portal). See Figure 4-18 for additional reference information.

  • Page 173: Ktp 73 - Post Installation Unit Verification

    For new installations utilize the connectors, circuit card assembly, etc. included in the KFD 900 System Installation Kits or in Installation Materials Required but Not Supplied and referenced in Table 4-2: 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-17 ©...

  • Page 174: Weight And Balance Analysis

    0.41 kg See Figure A-8 KTP 73 OAT Probe 89000025-001-[ ] 0.15 lb 0.07 kg 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-18 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 175: Aircraft Electrical Load Analysis (Ela)

    An ELA must be completed to show the capacity of the aircraft electrical system is sufficient for the additional electrical load from the KFD 900 System. The typical current draw for the KFD 900 System is 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 4-19 ©...

  • Page 176: Airplane Flight Manual Supplement (Afms)

    Aircraft Electrical Load and Power Source Capacity Analysis. 4.11 Airplane Flight Manual Supplement (AFMS) The BendixKing KFD 900 Airplane Flight Manual Supplement (AFMS), PN 89800009-004, information must be filled out and provided to the airplane owner. Complete the information on page i of the AFMS (Repair Station #, Name, Address, Make and Model Airplane, Airplane Registration # and Serial #) and information on page 1-2 relating to installed equipment and cross-cockpit usage.

  • Page 177: Connector Pinout Information

    GPS_2_GAMA_429_RX_A Included EGPWS_A453_RX_L Reserved EGPWS_A429_TX_B Reserved WX_RADAR_A453_RX_L_TERM Reserved WX_RADAR_A453_RX_L Reserved WX_RADAR_A429_TX_B Reserved UAT_WX_RS232_GND Included 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-1 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 178 ADAHRS2_A429_RX_B Reserved ADAHRS2_A429_RX_A Reserved GPS_1_GAMA_429_RX_B Included GPS_1_GAMA_429_RX_A Included EFIS_CTL_429_TX_B Included EFIS_CTL_429_TX_A Included KA_52-57_N15V_PWR Reserved 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-2 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 179: Table 5-2 Ksd 100 J2 Pin Descriptions (Viewed From Lru)

    IFD1_ETH_TX_P Reserved IFD1_ETH_TX_N Reserved IFD2_ETH_TX_P Reserved IFD2_ETH_TX_N Reserved KSD100_MAINT_BOOT_MODE_DIGO Included KSD100_MAINT_ETH_TX_P Included KSD100_MAINT_ETH_TX_N Included 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-3 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 180 GS_FLAG_-_IN Included LOC_ENERGIZE_IN Included VOR_COMP_IN_HI Included VOR_COMP_IN_LO Included AUDIO_ALERTS_OUT Included AUDIO_ALERTS_OUT_REF Included GS_+_UP_IN Included 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-4 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 181 EIS_RS232_TX Reserved EIS_RS232_RX Reserved KSD100_MAINT_RS232_TX Included KSD100_MAINT_RS232_RX Included KSD100_CTRL_PANEL_RS232_TX Included KSD100_CTRL_PANEL_RS232_RX Included KSD100_CTRL_PANEL_PWR_15VDC Included 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-5 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 182: Kcp 100

    Description Power Input Power Input Power Input (Spare) Spare Attitude Valid Excitation Wave 26VAC 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-6 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 183 A429 RX1 A A429 RX1 B Chassis GND A429 TX0 A A429 TX0 B Chassis GND 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-7 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 184: Kg 71 Pressure Ports

    THE CONNECTION OF KG 71 TO THE ORIGINAL PRESSURE DISTRIBUTION SYSTEM MUST BE IN COMPLIANCE WITH 14 CFR 23.1323 AND 23.1325. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-8 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 185: Kg 71 Maintenance Port

    In/Out CAN Bus Lo In/Out Power Ground Chassis Ground Spare CAN Bus Lo In/Out 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-9 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 186: Ktp 73

    Table 5-9 Configuration Module (J2 Backshell) Pin Descriptions Description APM_SO APM_SI APM_SCLK APM_CS_N APM_WP_N APM_PWR_3P3VDC APM_PWR_RTN 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 5-10 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 187: System Configuration

    THE PRESENCE OF FROST OR DUST ON THE INFRA-RED (IR) BAR MAY IMPEDE TOUCH SCREEN FUNCTIONALITY. CLEAN IR BAR IN ACCORDANCE WITH SECTION 9.2.4.3. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 188: Figure 6-1 Ksd 100 Installation/Maintenance Functional Diagram

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS Figure 6-1 KSD 100 Installation/Maintenance Functional Diagram 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-2 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 189: Mounting, Wiring, And Power Checks

    APPLIED ONLY TO THE PINS SPECIFIED IN THE INTERCONNECT WIRING DIAGRAMS IN APPENDIX B INTERCONNECT DIAGRAMS. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-3 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 190: Ksd 100 Configuration (Pfd) Setup

    (3) Touch the “B” again to display the Config Mode Screen, Figure 6-5. Figure 6-3 Database Acknowledge Screen 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-4 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 191: Figure 6-4 Apm Configuration Mismatch Screen

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS Figure 6-4 APM Configuration Mismatch Screen Figure 6-5 Config Mode Screen 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-5 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 192: Figure 6-6 Configuration Preview Window

    Figure 6-7, provides access to the sub-menus that allow the KFD 900 System to be configured. Pressing a button on the main menu will display the related sub-menu. The Back-Arrow button “<” is 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-6 ©...

  • Page 193: Figure 6-7 Installer Main Menu

    CONFIGURATION SETTINGS MUST BE ACCESSED AND VERIFIED WITHIN INSTALLER MAIN MENU. Figure 6-7 Installer Main Menu 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-7 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 194: System Configuration Setup

    (5) Pitch Bias (6) Pilot V-Speed (7) Engine (8) Units Figure 6-8 System Config Sub-Menu 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-8 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 195: Lighting

    (1) From System Config sub-menu, Figure 6-8, press the External Dimming Calibration button to display the External Dimming Calibration sub-menu, Figure 6-10. Figure 6-10 External Dimming Calibration Sub-Menu 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-9 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 196: Figure 6-11 Minimum Brightness Level

    (Note: Default value is 0) (g) Press the Back-Arrow button to exit the Min Brightness Level window. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-10 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 197: Figure 6-12 Maximum Brightness Levels

    (g) Press the Back-Arrow button to exit the Max Brightness Level window (h) Press the Back-Arrow button to exit the External Dimming Calibration menu 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-11 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 198: Aircraft Tail Number

    (3) Verify that the Tail Number is reflected correctly on the Aircraft Tail # button as illustrated in Figure 6-14. Figure 6-14 A/C Tail Number 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-12 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 199: Aircraft Serial Number

    NOTE THE PITCH BIAS IS LIMITED TO A RANGE OF ± 5 DEGREES WITH INCREMENTS OF 0.1. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-13 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 200: Pilot V-Speed Locking

    Config sub-menu, Figure 6-8. (2) From System Config sub-menu press the Pilot V-Spd button to toggle between Unlocked and 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-14 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 201: Engine Configuration

    (1) Press the Units button to toggle between Knots (KT) and Miles per Hour (MPH), shown in Figure 6- Figure 6-21 Units Configuration 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-15 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 202: Pfd Configuration Setup

    (4) Terrain Awareness and Warning System (TAWS) (5) KSD ALT Preselect Figure 6-23 PFD Sub-Menu 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-16 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 203: Vertical Speed Indicator Range

    A VALUE COMPARABLE TO THE AIRPLANE’S EXISTING VSI’S RANGE. FOR EXAMPLE, IF THE EXISTING VSI HAS A RANGE OF 3000 FPM, THEN THE VSI SHOULD BE SET TO ± 3000 FPM. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-17 ©...

  • Page 204: Airspeed

    V-Speed tape, Figure 6-26, is also displayed. The mock tape illustrates the relative position and color bands for the V-Speeds in a graphical representation. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-18 ©...

  • Page 205: Figure 6-26 V-Speed Tape Illustration

    HIGHER PRIORITY THAN THE FORMER. THIS BEHAVIOR MAY RESULT IN OVERLAPPING ENTRIES AND VALUES THAT ARE NOT SEEN. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-19 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 206: Figure 6-27 Airspeed Sub-Menu

    SPD KEY LOCATED ON THE V-SPEED KEYPAD. THE CLEAR V-SPD BUTTON IS ONLY SELECTABLE BEFORE A NUMBER BUTTON IS PRESSED ON THE V-SPEED KEYPAD. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-20 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 207: Master Audio Volume

    THE DEFAULT VOLUME LEVEL IS 80. THE VOLUME LEVEL FOR THE AUDIO ALERTS SHOULD BE ADJUSTED SUCH THAT THE ALERTS ARE AUDIBLE UNDER ALL ANTICIPATED NOISE CONDITIONS. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-21 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 208: Terrain Awareness And Warning System (Taws) Toggle

    (1) Press the TAWS button to toggle between Not Installed and Installed, shown in Figure 6-30. Figure 6-30 TAWS Toggle 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-22 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 209: Ksd Altitude Preselect Toggle

    (2) GPS 2 (3) VLOC 1 (4) VLOC 2 (5) VLOC 3 Figure 6-31 GPS/NAV Sub-Menu 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-23 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 210: Table 6-1 Supported Navigation Sources

    GPS Navigator via RS-232 Serial interface. Geometric altitude is required for correct operation of Synthetic Vision, relative terrain on the moving map, and relative terrain in the Vertical Situation Display. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-24 ©...

  • Page 211: Gps Navigation Source

    (3) Press the Back-Arrow button to return to the GPS/NAV sub-menu. (4) Verify the selected LRU is reflected correctly on the GPS 1 button, shown in Figure 6-32. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-25 ©...

  • Page 212: Vloc Navigation Source

    CORRESPONDING VLOC BUTTON IS INACTIVATED. IF THE SELECTED GPS SOURCE IS A GPS ONLY SYSTEM, THEN THE CORRESPONDING VLOC BUTTON IS SELECTABLE. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-26 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 213: Figure 6-34 Vloc1 Sub-Menu

    (4) Verify that the selected LRU is reflected correctly on the VLOC1 button, shown in Figure 6-31. (5) If there is a second NAV radio installed, press the VLOC2 button to display the VLOC 2 sub-menu. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-27 ©...

  • Page 214: Figure 6-35 Vloc2 Sub-Menu

    NOTE VLOC 3 IS ONLY USED IF THE NAV RADIO HAS A COMPOSITE ANALOG SIGNAL. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-28 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 215: Autopilot Configuration Setup

    FLIGHT DIRECTOR (FD) FUNCTION IS NOT AUTHORIZED. (4) GPSS K Factor Figure 6-36 Autopilot Sub-Menu 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-29 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 216: Table 6-2 Supported Autopilots

    When the KSD 100 is configured to support an analog autopilot, the analog outputs are provided and monitoring of the outputs is activated. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-30 ©...

  • Page 217: Ap Computer

    (2) Press the button for the installed LRU option from the AP Computer sub-menu, Figure 6-37. (3) Press the Back-Arrow button to return to the Autopilot sub-menu. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-31 ©...

  • Page 218: Sync Fd Offset

    (4) From the Autopilot sub-menu, Figure 6-36, press the GPSS K Factor button to display the numeric keypad, Figure 6-39. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-32 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 219: Figure 6-39 Gpss K Factor Keypad

    (6) Verify that the new GPSS K Factor value is reflected correctly on the GPSS K Factor button as shown in Figure 6-40. Figure 6-40 GPSS K Factor 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-33 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 220: Broadcast Wx Configuration

    Figure 6-41 Broadcast WX Sub-Menu (2) From the Broadcast WX sub-menu, Figure 6-41, press the Broadcast WX button. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-34 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 221: Traffic Configuration Setup

    Manufacturer Model BendixKing KGX 130x KGX 150x FreeFlight Systems FDL-978-XVRL FDL-978-XVR FDL-978-XVR/G FDL-978-XVRD FDL-978-XVRD/G 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-35 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 222: Figure 6-43 Traffic Sub-Menu

    (4) Press the Back-Arrow button to return to the Traffic sub-menu (5) Verify that the selected ADS-B is reflected correctly on the Traffic button, shown in Figure 6-43. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-36 ©...

  • Page 223: Save & Exit Configuration Mode

    (2) KG 71 Installation Orientation and Tilt Angles (3) KMG 7010 Installation Orientation and Tilt Angles (4) KMG 7010 Magnetometer Compensation 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-37 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 224: Kg 71 Maintenance Interface Configuration

    Load the KG 71 Configuration and Maintenance Tool (CMT) software application, available for download on the BendixKing Website - Dealer Portal, onto a maintenance PC. Connect the Maintenance PC to the DB-9 KG 71 maintenance port using the USB to Serial Converter/Adapter, refer to Section 5.3.3 and Figure B-7 for more information on the maintenance port and wiring.

  • Page 225: Kg 71 Orientation

    CMT application will display dashes for the actual Pitch and Roll Offsets and actual Pitch and Roll Angles. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-39 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 226: Figure 6-48 Kg 71 Orientation Drop-Down List

    AIRPLANE IS IN THE SAME REFERENCE POSITION FOR BOTH KG 71 AND KMG 7010 CALIBRATIONS. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-40 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 227: Kg 71 Digital I/O Configuration

    PFD’s value. The SDI can be set to values of 00, 01, 10, and 11. The SDI is set to 01 for standard installations. Figure 6-50 CMT Page for Digital I/O Configuration 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-41 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 228: Arinc 429 Transmit Channel Configuration

    When the KG 71 I/O configuration setup is complete, the technician will press the Save Configuration button to save and store the configuration values. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-42 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 229: Same As Tx0 (For Ksd 100)

    (1) 203 – Pressure Altitude, transmit rate 20 Hz (2) 204 – Baro Corrected Altitude, transmit rate 20 Hz 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-43 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 230: Custom Configuration

    Inertial Pitch Rate Inertial Roll Rate Inertial Yaw Rate Vertical Acceleration Inertial Vertical Velocity 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-44 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 231: Figure 6-52 Arinc Transmit Channel Custom Configuration

    Each channel can be configured to High Speed or Low Speed from the two drop-down lists at the right- bottom side of the page. All available labels are listed on the page with rate option. If “- -” are displayed 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-45 ©...

  • Page 232: Kg 71 Transponder Serial Interface

    MEASUREMENT. PERFORM AT THE SAME LEVELING POSITION TO ENSURE THAT THE AIRPLANE IS IN THE SAME REFERENCE POSITION FOR BOTH KG 71 AND KMG 7010. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-46 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 233: Table 6-7 Kmg 7010 Orientation Numbers

    Right Left Front Right Rear Right Front Left Rear Left Right Down Left Down 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-47 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 234: Figure 6-53 Kmg 7010 Installation Orientation

    Figure 6-53 KMG 7010 Installation Orientation 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-48 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 235: Magnetometer Installation Orientation

    (1) Select mounting orientation, as shown in Figure 6-54. (2) Using the inclinometer, measure the angles at the KMG 7010 for both the pitch and roll axis. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-49 ©...

  • Page 236: Figure 6-55 X, Y, Z Axis Positive Direction

    KG 71 circuit breaker can be cycled and pitch and roll should be displayed as zero on the KSD 100. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-50 ©...

  • Page 237: Magnetometer Compensation

    (4) Once the airplane is physically oriented to the specified heading, wait 30 - 60 seconds for the reading to stabilize. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-51 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 238: Figure 6-56 Kmg 7010 Calibration Reading

    (7) Repeat steps 3 through 6 above for each 30 degree increment. Figure 6-56 KMG 7010 Calibration Reading 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-52 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 239: Ktp 73 Configuration (Outside Air Temperature Probe)

    6.5 KTP 73 Configuration (Outside Air Temperature Probe) There are no configuration settings for the KTP 73 Temperature Probe. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 6-53 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 240: System Checkout

    The KSD 100 is configured using the touch screen, shown in Figure 7-1, and the Menu button, Figure 7-2. Figure 7-1 KSD 100 Screen Figure 7-2 Menu Button 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 241: Attitude Checkout

    NOTE COMPLETE A PITOT AND STATIC LEAK CHECK PRIOR TO ANY ALTITUDE AND AIRSPEED CHECKS. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-2 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 242 22,000 12.636 25,000 11.104 30,000 8.885 35,000 7.041 40,000 5.538 45,000 4.355 50,000 3.425 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-3 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 243: Airspeed Display And Standby Airspeed Indicator Checkout

    (5) Decrease the airspeed to zero. (6) Set the altitude to the current location elevation. (7) Disconnect the pitot/static tester. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-4 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 244: Outside Air Temperature Checkout

    (7) Press the “X” button to close the CDI Source sub-menu and return to the KSD 100 screen. (8) From the KSD 100 screen, Figure 7-1, press the Menu button, Figure 7-2, located at the top right. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-5 ©...

  • Page 245: Figure 7-6 Main Menu

    (9) From the Menu, Figure 7-6, press the PFD button to launch the PFD Menu, Figure 7-7. Figure 7-6 Main Menu Figure 7-7 PFD Menu 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-6 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 246: Figure 7-8 Bearing Pointers Sub-Menu

    (b) Verify the CDI CRS numeric value and CDI course pointer matches the GPS Navigators desired track (DTK). 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-7 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 247: Nav Receiver

    (b) A Nav Radio Navigator will not have a CDI switch, and this step 2 can be ignored. (3) From the KSD 100 screen, press the CDI button located at the bottom of the PFD screen, Figure 7- 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-8 ©...

  • Page 248: Figure 7-10 Crs Button (Value Shown For Reference Only)

    Figure 7-10 CRS Button (Value Shown for Reference Only) Figure 7-11 SYNC Button (Value Shown for Reference Only) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-9 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 249 (d) Verify the CDI Bearing Pointer 1 and Bearing Pointer 2 are both removed from the PFD CDI. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-10 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 250: Universal Access Transceiver (Uat) Checkout

    (1) Ensure the airplane is located outside and within reception range of known ADS-B station. Depending on your location, you may need to be airborne to receive ADS-B data. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-11 ©...

  • Page 251: Autopilot System Setup

    (5) Set up the NAV generator and VLOC receiver to a VOR station. (6) Synchronize the course to the VOR bearing to station value by pushing and holding the CRS knob 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-12 ©...

  • Page 252: Kcp 100 Checkout

    Section 6.2.1.2 External Dimming to match the other equipment in the instrument panel. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-13 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 253: Emi Interaction Checkout

    • Seattle Avionics (http://www.seattleavionics.com/ChartData/Default.aspx?. For Wi-Fi loading, download the FlyQ App from the Apple® App Store). 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-14 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 254: Usb Database Loading

    Wingman Services database subscription(s) is paired with the unit during installation and Seattle Avionics subscription is per user. NOTE BENDIXKING RECOMMENDS CHECKING FOR DATABASE UPDATES EVERY 28 DAYS. 7.5.1.1 USB Database Loading (1) Power on the KSD 100. (2) Insert the memory device into the USB port in front of the display.

  • Page 255: Figure 7-15 Database Loading Menu

    Figure 7-17. This page allows the user to select the databases to install and shows the estimated time to complete the installation. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-16 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 256: Figure 7-17 Database Loading Page

    Figure 7-17, to begin the database loading process. Once the database loading has started, the previously installed databases, if any, will be erased. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-17 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 257: Figure 7-19 Database Loading In Progress Screen

    (14) Review and acknowledge the updated dates and effectivity ranges shown on the Database Acknowledge Screen (refer to Figure 6-3). 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-18 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 258: Wi-Fi Database Loading

    (9) On the external device connect to the AeroVue Touch Wi-Fi. The Wi-Fi name is “KSD_AP”, followed by the serial number of the unit (for example, “KSD_AP89000020”). 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-19 ©...

  • Page 259: Figure 7-22 Connected To Ksd Wi-Fi

    TIME THE AEROVUE TOUCH DOES NOT ALLOW ANY USER INTERACTION. (11) On the external device, open an Internet browser and enter the web address: https://ksd100.bendixking.com, to access the DataManager Lite application, Figure 7-23. (12) From the webpage, select “Choose File”.

  • Page 260: Figure 7-24 Wi-Fi Webpage With Selected Database

    KSD 100, Figure 7-25, and verifies the database information, Figure 7-26. Figure 7-25 Uploading Databases to KSD 100 Figure 7-26 Verifying Databases 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-21 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 261: Seattle Avionics Databases

    (1) Check that Wi-Fi is turned on and connected to the Internet. (2) Press on the iPad® or iPhone®. (3) Login to your account 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-22 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 262: Figure 7-29 Flyq App Main Screen

    The ChartData Manager screen appears and displays the status of databases for all states, Figure 7-30: Not selected Current Expired or not downloaded Update available 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-23 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 263: Figure 7-30 Chartdata Manager Screen

    (6) Select the chart data type to download for each selected region (available charts depend on subscription), Figure 7-30: • Charts • IFR Lo 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-24 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 264: Figure 7-31 Flyq Application Detected Window

    (10) Press “OK” on the KSD 100, Figure 7-31. Figure 7-31 FlyQ Application Detected Window 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-25 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 265: Figure 7-32 Flyq Database Update Available Window

    Figure 7-34. Figure 7-34 Performing FlyQ Database Update Progress Window 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-26 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 266: Database Loading Errors

    Download the paid subscription. One time registration for the database is already utilized. already utilized 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-27 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 267: Wi-Fi Database Loading Errors

    Figure 7-37 and the list of Wi-Fi errors in Table 7-4. Figure 7-37 Wi-Fi Serial Number Mismatch Example 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-28 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 268: Figure 7-38 Flyq Database Update Error Message

    APP. TO CHECK THE STATUS OF THE FILES DOWNLOADED FOR A PARTICULAR STATE, DOUBLE -TAP ON THE STATE. CONTACT SEATTLE AVIONICS FOR FURTHER ASSISTANCE. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-29 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 269: Kfd 900 Flight Software Update

    DO NOT POWER OFF THE KSD 100 DURING THE SOFTWARE LOADING PROCESS UNTIL PROMPTED TO CYCLE POWER THE UNIT. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-30 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 270: Ksd 100 Software Field Loading Procedure

    7.5.2.1.1 KSD 100 Software Field Loading Procedure (1) Format the USB drive to FAT32. (2) Download KSD 100 software onto the USB drive from the BendixKing Website - Dealer Portal. NOTE THE UNZIPPED SOFTWARE. TAR FILE MUST BE SAVED TO THE USB ROOT DIRECTORY AND NOT CONTAINED IN A FOLDER.

  • Page 271: Figure 7-41 Software Loading Sub-Menu (New Software Found)

    (12) When the software load is complete a prompt window, Figure 7-44, will appear to calibrate touch or to cancel. If touch recalibration is not required, press the Cancel button. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-32 ©...

  • Page 272: Figure 7-44 Software Loading Pop-Up Window (Loading Complete)

    (b) Power cycle the KSD 100 display by pulling and resetting the PFD breaker. (15) Software installation is complete, record the software part information in the airplane logbook. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 7-33 ©...

  • Page 273: Ksd 100 Software Loading Errors

    USB drive. Restart software loading process. 7.5.2.3 KG 71 Software Update The KG 71 software cannot be updated in the field. The unit must be returned to BendixKing if an update is required. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual...

  • Page 274: Troubleshooting

    KG 71 Defective • Check wiring from KG 71 to KSD • Replace KG 71 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 275 • Replace KTP 73 Dashed Probe Failed • Replace KG 71 KG 71 Defective 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-2 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 276 • Check configuration set up for type of VOR or GPS of VOR or GPS 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-3 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 277: Built-In-Test (Bit) Function

    “PBIT FPGA SPI Bus KSD 100 Defective • If fault persists, Fault” replace KSD 100 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-4 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 278: C-Bit

    The following PBITs are performed: • Heartbeat Monitor • Over-Temperature Monitor • Loopback Monitor 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-5 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 279: Table 8-3 C-Bit Failures Troubleshooting Chart

    BIT Failures Troubleshooting Chart NOTE 1: For directions how to retrieve the Event Log, refer to Section 6.3.1. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-6 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 280: Ksd 100 Touch Calibration

    TO PROCEED WITHOUT MANUAL TOUCH CALIBRATION, CLOSE THE MANUAL TOUCH CALIBRATION MENU BY PRESSING THE UP ARROW “^” BUTTON. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-7 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 281: Figure 8-3 Example Of Touch Calibration Utility Screen

    (10) The touch point plus sign is removed and the next touch point is displayed. (11) This cycle continues until all 5 points are presented 3 times. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-8 ©...

  • Page 282: Figure 8-4 Example Of The Touch Calibration Utility Test Screen

    (Figure 8-5) is displayed indicating that the calibration settings are reverted to the previ- ous setting. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-9 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 283: Default Touch Calibration

    TO PROCEED WITHOUT REVERTING TO THE DEFAULT TOUCH CALIBRATION SETTINGS, CLOSE THE RESTORE DEF. TOUCH CAL. SCREEN BY PRESSING THE UP ARROW “^” BUTTON. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-10 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 284: Figure 8-7 Restoration Of Default Values Successful Screen

    (5) Close the Main Menu, by pressing the “X” button, to restore the PFD to normal display with no menus open. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-11 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 285: Kg 71 Troubleshooting

    Altitude only, no airspeed. fails. Event Log Code 5. lem persists, replace the KG 71 unit. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-12 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 286 Log Code 14. ing, replace KMG 7010. If problem persists, replace the KG 71. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-13 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 287: Table 8-5 Kg 71 Event Codes

    • Restart the KG 71. If problem persists, 71 provides Altitude Check fails. replace the KG 71 unit. only. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-14 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 288 Integrity CBIT detects a replace the KG 71 unit. failure. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-15 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 289 • Replace the KG 71 unit. during the flight, attitude performance degraded. exhibits significant drifts. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-16 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 290: Kmg 7010 Troubleshooting

    • Autopilot heading mode uses desired track in place of magnetic heading If GPS track is unavailable, use the magnetic compass 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-17 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 291 APPR mode A/P NAV INOP outputs from the KSD 100 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-18 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 292 See “No Navigation Data or Failure” troubleshooting procedure in VLOC 2 FAIL Table 8-1 KFD 900 System Troubleshooting Chart VLOC 3 FAIL 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-19 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 293 • If fault persists, replace KSD 100 DATABASE EXPIRED Database(s) has expired Download the latest database(s) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-20 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 294 The Backup Configuration Data is APM BACKUP FAULT • If fault persists, replace the KSD unavailable 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 8-21 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 295: Repair And Return

    KG 71 sys- tem. 8.6 Repair and Return If repair is necessary, the units must be sent to a BendixKing repair facility. There are no field repairable items inside the KFD 900 LRUs. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual...

  • Page 296: Instructions For Continued Airworthiness

    9.2.4.1 Cleaning CAUTION THE DISPLAY SCREEN GLASS HAS AN OPTICAL COATING THAT IS EASILY DAMAGED. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 9-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 297: Screen Cleaning

    TO ENSURE PROPER IR BAR FUNCTION, ALL EXPOSED EDGES OF THE IR BAR, ESPECIALLY THE EDGE BETWEEN THE IR BAR AND THE SCREEN, NEED TO REMAIN FREE OF DEBRIS. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 9-2 ©...

  • Page 298: Inspection

    (4) The KFD 900 System mating connector metal back shells should be checked to verify a resistance of 2.5 milliohms, or less, to airframe ground. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 9-3 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 299: Inspection Criteria

    If any of these indications are present, an electrical bonding test must be performed. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 9-4 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 300 If any of these indications are present, an electrical bonding test must be performed. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 9-5 © Honeywell International Inc. Do not copy without express permission of Honeywell.
  • Page 301 Check for general condition, routing, 12 months chafing, and integrity of clamping and stand-offs, and shields. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 9-6 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 302: Adjustments

    Refer to Section 8 of this document for troubleshooting steps. The KFD 900 System components are not field-repairable. Repairs must be made by a properly certificated repair facility. Contact BendixKing Customer Service for details. 9.2.7 Storage Limitation There are no storage limitations on the KFD 900 System components.

  • Page 303: Kcp 100 Removal

    For reinstallation of the KCP 100, execute the steps in Section 4.4 KCP 100 Installation as well as the steps in Section 7.2.11 KCP 100 Checkout. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 9-8 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 304: Ktp 73 Reinstallation

    Verify proper operation of the KFD 900 System by following the procedures in Section 7 System Checkout. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page 9-9 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 305: Appendix A Outline And Installation Drawings

    APPENDIX A OUTLINE AND INSTALLATION DRAWINGS Figure A-1 KSD 100 Center of Gravity 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-1 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 306: Figure A-2 Ksd 100 Panel Cutout Dimensions

    Figure A-2 KSD 100 Panel Cutout Dimensions 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-2 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 307: Figure A-3 Kcp 100 Dimensions And Center Of Gravity - Portrait Orientation

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS Figure A-3 KCP 100 Dimensions and Center of Gravity - Portrait Orientation 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-3 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 308: Figure A-4 Kcp 100 Dimensions And Center Of Gravity - Landscape Orientation

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS Figure A-4 KCP 100 Dimensions and Center of Gravity - Landscape Orientation 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-4 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 309: Figure A-5 Kcp 100 Panel Cutout Dimensions

    UTILIZE SAME KCP 100 PANEL CUTOUT DIMENSIONS FOR HORIZONTAL KCP 100 INSTALLATION BUT ROTATED 90 DEGREES. 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-5 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 310: Figure A-6 Kg 71 Dimensions And Center Of Gravity

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS Figure A-6 KG 71 Dimensions and Center of Gravity 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-6 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 311: Figure A-7 Kg 71 Mounting Hole Pattern Diagram

    RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS Figure A-7 KG 71 Mounting Hole Pattern Diagram 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-7 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 312: Figure A-8 Kmg 7010 Outline And Mounting Drawing (Sheet 1

    Figure A-8 KMG 7010 Outline and Mounting Drawing (Sheet 1 of 2) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-8 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 313: Figure A-9 Kmg 7010 Outline And Mounting Drawing (Sheet 2

    Figure A-9 KMG 7010 Outline and Mounting Drawing (Sheet 2 of 2) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-9 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 314: Figure A-10 Ktp 73 Dimensions And Center Of Gravity

    Figure A-10 KTP 73 Dimensions and Center of Gravity 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-10 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 315: Figure A-11 Ktp 73 Mounting Hole Pattern

    Figure A-11 KTP 73 Mounting Hole Pattern Figure A-12 KTP 73 Generic Doubler (for 0.016 - 0.032 inch skin thickness) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page A-11 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 316: Appendix B Interconnect Diagrams

    APPENDIX B INTERCONNECT DIAGRAMS Figure B-1 KFD 900 Power Connection Diagrams 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page B-1 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 317: Figure B-2 Autopilot Interconnect Diagram

    Figure B-2 Autopilot Interconnect Diagram 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page B-2 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 318: Figure B-3 Weather And Traffic Interconnect Diagram

    For metallic backshells with grounding capability, ground shield directly to the backshell. Drawing Symbols: Shielded Twisted Pair Figure B-3 Weather and Traffic Interconnect Diagram 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page B-3 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 319: Figure B-4 Navigation Interconnect Diagram

    Figure B-4 Navigation Interconnect Diagram 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page B-4 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 320: Figure B-5 Audio Panel Interconnect Diagram

    Connections shown in parentheses “()” denotes an alternate acceptable interconnect. Drawing Symbols: Shielded Twisted Pair Figure B-5 Audio Panel Interconnect Diagram 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page B-5 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 321: Figure B-6 Ksd 100 Lru Interconnect Diagram

    Over Braid will be installed between all wires from J2 of the KSD 100 and P1 of the KCP 100. Terminate Braid within connector backshells. Figure B-6 KSD 100 LRU Interconnect Diagram 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page B-6 ©...
  • Page 322 Figure B-7 KG 71 LRU Interconnect Diagram - 1 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page B-7 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 323 Figure B-8 KG 71 LRU Interconnect Diagram - 2 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page B-8 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 324 Figure B-9 KG 71 LRU Interconnect Diagram - 3 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page B-9 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

  • Page 325: Appendix C Kfd 900 System Installation Worksheet

    (e.g. -0000). Note Alternate part number is used for the Landscape version of the Control Panel 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page C-1 © Honeywell International Inc. Do not copy without express permission of Honeywell.

  • Page 326: Figure C-1 Kfd 900 System Components And Cable Routing (Top View

    On Figure C-1, draw in the location of the KFD 900 System components and the wiring routing. Figure C-1 KFD 900 System Components and Cable Routing (Top View) 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page C-2 ©...

  • Page 327: Figure C-2 Kfd 900 System Components And Cable Routing (Side View

    On Figure C-3, draw in the KFD 900 Circuit Breaker and Switch locations on the cockpit depiction. Figure C-3 KFD 900 System Circuit Breakers and Switch Locations 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page C-3 ©...

  • Page 328: Table C-2 Electrical Load Analysis - Normal Operating Conditions

    Circuit of Aircraft Breaker Time (min) Breaker Operation Ampere Ampere Ampere Ampere Ampere Ampere 89000009-002 KFD 900 AeroVue Touch AML STC Installation Manual Rev 0 Page C-4 © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...
  • Page 329 RELEASED FOR THE EXCLUSIVE USE BY: HONEYWELL EMPLOYEE AMERICAS © Honeywell International Inc. Do not copy without express permission of Honeywell. REF:...

Table of Contents