Experia IRiS LED Bubble Wall Instruction Manual

Experia IRiS LED Bubble Wall Instruction Manual

Advertisement

Quick Links

M Clayton
26/09/2017
V1
010046
IRiS LED Bubble Wall

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IRiS LED Bubble Wall and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Experia IRiS LED Bubble Wall

  • Page 1 M Clayton 26/09/2017 010046 IRiS LED Bubble Wall...
  • Page 2 Congratulations on the purchase of your IRiS LED Bubble Wall! The IRiS LED Bubble Wall has been designed specifically for people with special needs and should, if used in accordance with these guidelines, offer years of switching learning and fun!
  • Page 3 Pack Contents 1 x IRiS LED Bubble Wall 1 x Low Voltage Transformer 1 x Foot Pump for filling 1 x Drain Pipe 1 x Instruction Manual 1 x Fixing Kit 1 x Installation Manual The IRiS Bubble Wall should be installed by a competent person, following the steps in the installation manual.
  • Page 4 All Bubble Walls require the water in them to be changed every 4 – 6 weeks to slow the build-up of any bacteria. You will need the empty and fill kit that came with the IRiS Bubble Tube and a clean bucket. Experia recommend you use a 5 litre bucket minimum.
  • Page 5 Filling 1. Remove the 2 white caps from the screw covers on the bottom front of the bubble wall. A small flat bladed screwdriver can be used to prise these off. 2. Remove the 2 screws and the white plastic cover to reveal the drain/fill valve. 3.
  • Page 6 We can’t promise to develop every product but if it’s a great idea, we’ll try! Manufactured proudly in the UK by: Experia, Acorn Phase 3, High Street, Grimethorpe, S72 7BD. © Copyright 2017 Experia All rights reserved. Experia is a registered trademark...

Table of Contents