Download Print this page
Indesit SI8 1Q WD UK 1 Quick Start Manual

Indesit SI8 1Q WD UK 1 Quick Start Manual

Advertisement

Quick Links

Read the Instructions for Use carefully before
using the appliance.
1
2
10
3
X
X
5
9
4
6
7
8
11
1. Fan*
2. Electronic control panel / light unit
3. Bottle rack*
4. Sensor cover
5. Area shelves
6. Rating plate with commercial name
7. Fruits and vegetables crisper*
8. Door reversibility kit
9. Bottle holder*
10. Door trays
11. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply,
the display lights up and all the icons appear on the
display for approximately 1 second. The default (factory)
values of the fridge compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two persons.
There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may vary
from model to model
To receive the assistance call the number shown on
the warranty booklet or follow the instruction on the
web site www.indesit.com
QUICK START GUIDE
Indicator LEDs to display the current temperature
setpoint or the Fast Cooling function.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses LEDs
light, allowing a better lightning as well as a very low energy
consumption.
If the LED light system does not work, please contact the
Service to replace it.
Important: The refrigerator compartment light switches on
when the refrigerator door is opened. If the door is kept open for
more then 8 minutes the light will be automatically switched off.
ALARM TYPE
Signal
Door open alarm
Refrigerator Light blinks
Door open alarm
Refrigerator Light OFF
Malfunction
Any temperature indicators blinks
GB
TEMPERATURE button
FAST COOLING button
 
 
 
 
 
 
 
 
FAST COOLING function
 
The use of the Fast Cooling function is recommended:
 
- to increase the cooling speed of the refrigerator
compartment when placing a very high quantity of food
 
within it,
To activate the Fast Cooling function, press and hold
for 3 seconds the Temperature button on the control
panel till all the 3 LEDs will turn on.
The function is automatically deactivated after 6 hours
and return to previous selected set point. The function
can be manually deactivated by pressing and holding for
3 seconds the Temperature button on the control panel.
ALARMS TABLE
Cause
The door has remained open for more than 5 minutes.
The door has remained open for more than 8 minutes.
Product malfunction.
FAN
The fan improves temperature distribution inside the refrigerator compartment,
allowing better preservation of stored food.
By default, the fan is switched on.
It is advisable to keep the fan switched on when the ambient air temperature is above
27 - 28°C or if you notice drops of water on the glass shelves or in sever humidity
conditions.
To turn off the fan press the button of fan.
Please note that when the fan is switched on it will not continuously work. The fan
will start/stop working depending on the temperature and/or humidity level inside the
fridge.
It is therefore absolutely normal if the fan does not move even if the fan is switched
on.
TEMPERATURE button
Press the Temperature button on the control panel to adjust the temperature from the
warmest through the lower to the coldest level.
Pressing the Temperature button, the temperature setting will change cyclically.
At first plug-in of appliance temperature setpoint is present at medium position
(factory setting).
Following table shows temperature setpoints:
 
 
 
 
 
 
 
 
 
 
 
 
 
Note: Displayed set points correspond to the average temperature
 
throughout the whole refrigerator.
 
 
Cure
Close the door
Close the door
Contact the After-sales Service
EN
19515930100

Advertisement

loading

Summary of Contents for Indesit SI8 1Q WD UK 1

  • Page 1 The door has remained open for more than 8 minutes. Close the door To receive the assistance call the number shown on Malfunction Any temperature indicators blinks Product malfunction. Contact the After-sales Service the warranty booklet or follow the instruction on the web site www.indesit.com 19515930100...

This manual is also suitable for:

F160827