Switching On And Off; Checking The Charge Status Of The Battery - Grizzly ARV 4038 Instructions For Use Manual

GB
Working position: 1
Set this position when working with a new
implement.
Readjustment positions: 2,3 und 4
The working position can be lowered with
increased knife and sprung tine wear.
Wear can be identifi ed from an increasin-
gly poor result.
When the implement is delivered it
is in the Transport Position setting
1. Check that the appliance is turned off
before adjusting the working position.
2. Pull up the adjusting knob (see(
8) Turn the knob as appropriate and
push it down to snap in. Use your
other hand to hold the appliance.
The setting button is not intended
for height adjustment but rather to
compensate for wear. Selection of
a readjustment position without the
corresponding wear can overload
the motor and damage the cylinder.

Switching on and off

Before switching on the im-
plement ensure that it is not in
contact with any objects. Keep
your feet and hands well away
from the cylinder and the ejector
opening. Danger of injury!
1. Place the implement on a level
lawn surface
2. Ensure that the battery (
11) is inserted (see „Removing/
inserting the battery").
30
G
3. Insert the contact chip in to the
4. To switch on, press the power
5. Release the safety bar (
Overload protection: The motor
A is automatically switched off when
the implement is overloaded. Re-
lease the starting lever and reset
the implement after a cooling down
period of approx. 1 minute.
Checking the charge status of
the battery
The state of charge display on the battery
( 11b) indicates the state of charge of
the battery (
inserted in the device, the charge level
of the battery can also be read from the
charge level indicator (
per handlebar.
A
Press the button for the charge
level indicator (11b) on the battery
(11). The charge level of the batte-
ry is indicated by illumination of the
corresponding LED light.
Switching on:
opening provided on the power
switch (13).
switch (13) and hold it down
while pressing the safety bar
(14) against the bow-type hand-
le (1). Release the power switch
(13) - the device starts.
Switching off:
15). While the battery is
12) on the up-
14).