Page 2
Serres Saga quick installation guide 1/3. Preparing the device Connect the vacuum Power ON the device. As hose to the VAC MAIN soon as the power is on, inlet. Connect a second the self-check sequence vacuum hose to the VAC will start.
Page 3
Serres Saga quick installation guide 2/3. During the procedure Reset values to zero, if Select the suction limit necessary (only available by moving the soft key to up to 500ml of collected the desired suction limit. liquid). Start suction by tapping...
Page 4
Serres Saga quick installation guide 3/3. After the procedure Tap the END CASE key Dispensing of solidifying to end a procedure. agent in liners can also Solidifying agent is be triggered from the dispensed automatically Solidification Menu. if this option is enabled.
Need help?
Do you have a question about the Saga and is the answer not in the manual?
Questions and answers