Christie Spyder X80 Technical Reference
  1. Manuals
  2. Brands
  3. Christie Manuals
  4. Media Converter
  5. Spyder X80
  6. Technical reference

Christie Spyder X80 Technical Reference

Serial commands
Hide thumbs Also See for Spyder X80:
Table of Contents

Advertisement

Quick Links

Technical Reference
020-102207-08
Spyder X80
Serial Commands

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Spyder X80 and is the answer not in the manual?

Questions and answers

Related Manuals for Christie Spyder X80

Summary of Contents for Christie Spyder X80

  • Page 1 Technical Reference 020-102207-08 Spyder X80 Serial Commands...
  • Page 2 The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
  • Page 3 • OSP: Output Set Properties • COI: Capture Output Image • • CII: Capture Input Image CLI: Capture Layer Image • X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 4 • RPN: Request Page Names • RRD: Request register details • 10/9/2018 Added the following command: KTP: Keyframe Transparency Apply • X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 5: Table Of Contents

    KSZ–Layer Size Change ......................44 KTL–Treatment Learn......................45 KTP–Keyframe Transparency Apply ....................46 KTR–Treatment Recall ......................47 LAC–Layer Alignment Control ....................48 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 6 RSCD - Request Script CueData Details ..................94 RSEC-Request Script Element Count ..................95 RSF-Request System FrameRate ....................96 RSN–Request Source Name ..................... 97 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 7 SWA- Swap Layers ........................ 106 TPC-Test Pattern Clear ......................107 TPL-Test Pattern Load ......................108 TRN–Transition Layers ......................110 ZPA–Zoom/Pan Adjust ......................111 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 8: Communicating With Spyder

    Ellipsis (…) is used to indicate additional arguments of the same syntax may be included. • Example command notation: Command Name <Required Arguments> [Optional Arguments] X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 9: Command Considerations

    • Do not put an argument delimiter (space character) between the header and the external control command. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 10: Command Processor Responses

    One or more arguments of the command were invalid. Execution An error occurred while processing the command. For details, check the Alert Viewer in Spyder Studio. Checksum Reserved. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 11: Serial Api Commands

    New size (In Pixels) <LayerID(s)> One or more layers to apply the Layer ID(s) to set size on sizing change to X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 12: Arl-Apply Register To Layer

    10 (0x31 0x30) = Still image <RegisterID> Sets the register ID to recall. — <Layer1>..<LayerX> Sets the IDs of the layers to recall. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 13: Aro-Aspect Ratio Offset

    Sets the floating point aspect ratio — value. <Layer1>..<LayerX> Sets the IDs of the layers to apply — the aspect ratio offset to. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 14: Asc-Advance Script Cue

    None (no number) – advances the current script cue by one. n - to go forward -n - to go backward (default is 1) X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 15: Bld-Load Still In Background

    Determines what layer to load the file 0 = Loads onto the next background layer onto. 1 = Loads onto the current background layer X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 16: Bpl-Basic Preset Learn

    <Duration> Determines how long, in frames per second, a layer takes to transition 60 (Default) from one KeyFrame to another. (Optional) X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 17: Bpr-Basic Preset Recall

    Determines how long, in frames per second, a layer takes to transition <Duration> 60 (Default) from one KeyFrame to another. (Optional) X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 18: Btr-Transition Background

    Result Codes Arguments Argument Description Values <Duration> Determines how long, in frames per second, a background layer takes to — transition. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 19: Cii-Capture Input Image

    Specifies the input ID to capture. Zero-based <FileName> File name for the captured image including extension. *.bmp, *.png, *.jpg, or *.tif X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 20: Cli-Capture Layer Image

    <LayerID> Specifies the layer ID to capture. <FileName> File name for the captured image including extension. *.bmp, *.png, *.jpg, or *.tif X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 21: Coi-Capture Output Image

    Specifies the output ID to capture. Zero-based <FileName> File name for the captured image including extension. *.bmp, *.png, *.jpg, or *.tif X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 22: Crp-Crop Layer

    <Bottom> Sets the amount to crop from the bottom of the <Layer1>..<LayerX> Sets the IDs of the layers to crop. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 23: Cso-Clear Still On Output

    Result Codes Arguments Argument Description Values <OutputID> Sets the ID of the output to clear the image on. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 24: Dck-Delete Command Key

    <ID> Sets the ID to delete. — <Type> Sets the type of ID. (Optional) S = ScriptID (Default) R = RegisterID X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 25: Dmb-Device Mixer Bus Apply

    PGM = Both the program and preview layers are visible in their respective pixelspaces. <DeviceIndex1>..<DeviceIndexX> Indicates the target device Zero-based indexes. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 26: Dmt-Device Mixer Transition

    Sets the transition duration to be applied, 1 = Forces a cut transition in frames per second. <DeviceID1>..<DeviceIDX> Indicates the target device indexes. Zero-based X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 27: Dsl-Detailed Source List

    Returns a detailed source list. Syntax Response Lists count and six information fields for each source: <Count> <RegisterID> <SourceName> <HActive> <VActive> <Connector> <Thumbnail> Arguments None. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 28: Fkr-Function Key Recall

    Defines the ID type being recalled. If this F = Function key ID (Default) R = argument is not specified, the function RegisterID key ID is used. (Optional) X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 29: Frz-Freeze Layer

    1 = Enables freezing the specified layers <Layer1>..<LayerX> Sets the IDs of the layers to freeze — or unfreeze. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 30: Ick-Input Color Key

    0 to 512 <Layer1>..<LayerX> Sets the IDs of the layers to apply the — settings to. Related information ILK–Input Luminance Key (page 36) X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 31: Icl-Input Config Learn

    Sets the input configuration ID to save to. — <LayerID> Determines the layer ID to save the input configuration from. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 32: Icr-Input Configuration Recall

    If <ConfigurationID> is set to -1, sets the connector type 0 = HDMI to be switched to and auto-synched on a layer. 1 = Display Port 2 = SDI X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 33: Ics-Input Config Raster Size

    <Raster Edge> Side of input raster to adjust. Top, Left, Bottom, Right <Delta> Value in pixels to shift the raster. Numeric value X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 34: Igp - Input Get Properties

    <Property Name> <Property Type> <Current Value> Arguments Argument Description Values <Layer ID> Determines the properties of the source that the layer is 2 - 26 using. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 35: Ila-Input Level Adjust

    0.0 to 3.0 The value must be provided using a decimal (dot) <Layer1>..<LayerX> Sets the IDs of the layers to adjust. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 36: Ilk-Input Luminance Key

    Sets the gains for the specified layers. <Layer1>..<LayerX> Sets the IDs of the layers to apply the — settings to. Related information ICK—Input Color Key (page 30) X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 37: Ira-Input Config Raster

    Sets the number of pixels to move. negative number = Moves the video edge inward positive number = Moves the video edge outward X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 38: Isp - Input Set Properties

    Result Codes Arguments Argument Description Values <Layer ID> Determines the source config object on the layer. 2 - 26 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 39: Kbd-Border Adjust

    Sets the horizontal bevel offset. <V-BevelOffset> Sets the vertical bevel offset. <InsideSoftness> Sets the sharpness of the inside edge of the border. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 40: Kgp - Keyframe Get Properties

    <Property Name> <Property Type> <Current Value> Arguments Argument Description Values <Layer ID> Determines the properties of the source that the layer is using. 2 - 26 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 41: Kps-Layer Position Change

    1 = Relative position in pixels <Horizontal> Sets the horizontal position. — <Vertical> Sets the vertical position. — <Layer1>..<LayerX> Sets the IDs of the layers. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 42: Ksh-Shadow Adjust

    Sets the size of the shadow. <Transparency> Sets the transparency of the shadow. <Softness> Sets the outside softness of the shadow. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 43: Ksp - Keyframe Set Properties

    Result Codes Arguments Argument Description Values <Layer ID> Determines the source config object on the layer. 2 - 26 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 44: Ksz-Layer Size Change

    Sets the horizontal size, in pixels, of the specified layers. — <Layer1>..<LayerX> Sets the IDs of the layers to size. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 45: Ktl-Treatment Learn

    Argument9 = Learns the Pan/Zoom attribute Argument10 = Learns the Duration attribute Argument11 = Learns Transparency attribute Argument12 = Learns Size attribute X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 46: Ktp-Keyframe Transparency Apply

    Which layer or layers to Layer IDs are 2 based. apply transparency For example, Layer 1 is ID 2, Layer 5 is ID 6. value. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 47: Ktr-Treatment Recall

    Description Values <TreatmentID> Sets the ID of treatment to recall. — <Layer1>..<LayerX> Sets the IDs to recall the treatment to. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 48: Lac-Layer Alignment Control

    8 (Horizontal Decrement) = Decreases the horizontal spacing between two or more layers 9 (Horizontal Increment) = Increases the horizontal spacing between two or more layers X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 49 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 50 — for the alignment recall, in frames per second. <Layer1>..<Layer Sets the IDs of — — X> the layers to crop. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 51: Lap-Layer Assign Pixelspace

    TRN <Layer1>..<LayerX> Sets the IDs of the layers to associate with the — pixelspace. Related information TRN–Transition Layers (page 106) X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 52: Lcc-Layer Clone Control

    (Optional) <OffsetType> Determines the type of clone offset. 0 = Absolute (in pixels) 1 = Relative coordinate (Default) X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 53: Lck-Learn Command Key

    2 = Program only 3 = Both <LearnMixers> Determines if the command key is learned as a mixer. 0 = False 1 = True X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 54: Lso-Load Still On Output

    FTP or the Spyder Studio software. <OutputID> Sets the ID of the output to load the image on. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 55: Lsp-Layer Size And Position Change

    Sets the size and horizontal and vertical position of one or more layers. In cases where the size and position are being modified simultaneously for an application, Christie recommends using this command instead of the individual layer size and position commands (KPS and KSZ).

  • Page 56: Mvac - Multi-Viewer Assign Content

    ID of Multiviewer input view. ID based upon user defined in the Multiviewer properties InputID ID of the Input to assign. 0 Based ID X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 57: Mvas - Input, Output, Pgm And Pvw

    Optional: Gives the view a boarder around it. 0-100 <BorderThickness> Optional: Defines a color for the border. 0-255 <BorderColorRed> <BorderColorGreen> <BorderColorBlue> X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 58: Mvca - Multi-Viewer Clear All

    Values <OutputID> Sets the output. 3 = output 4 7 = output 8 11 = output 12 15 = output 16 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 59: Mvkf - Multi-Viewer Set Keyframe Properties

    Desired view resolution. <BorderThickness> Gives the view a boarder around it. 0-100 <BorderColorRed> Defines a color for the boarder. 0-255 <BorderColorGreen> <BorderColorBlue> X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 60: Mvpl - Multi-Viewer Preset Learn

    11 = output 12 15 = output 16 <PresetName> The name of the desired preset to learn. A unique preset name. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 61: Mvpr - Multi-Viewer Preset Recall

    Type of Multiviewer Preset. 0 = OpMon 1 = SourceMon 2 = Custom <PresetName> The current name of the desired custom preset to learn. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 62: Mvqo - Multi-Viewer Query Output

    Values <OutputID> Sets the output. 3 = output 4 7 = output 8 11 = output 12 15 = output 16 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 63: Mvst - Multi-Viewer Set Titling

    1 = BottomIn 2 = LeftIn 3 = RightIn 4 = TopOut 5 = BottomOut 6 = LeftOut 7 = RightOut X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 64: Ocb-Output Configuration Blending

    Sets the mode of the blend. Bezier Gamma Velocity <Curve1> Sets the curve parameter 1. 0.000 to 1.000 <Curve2> Sets the curve parameter 2. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 65: Occ-Output Config Connection

    Enables and disabled connector types for a specified output. Note: the Spyder X80 platform does not allow enabling multiple connector ports at the same time, and when executing this command against X80 the specified connector type will always be set to the active...

  • Page 66: Ocf-Output Configuration Format

    1 = Interlaced <Timing> Sets the reduced blanking timing. 0 = Off 1 = Reduced Level 1 2 = Reduced Level 2 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 67: Ocm-Output Configuration Mode

    Sets the program pixelspace to Scaled on. If a preview ID is <PixelspaceID> — supplied, its associated program pixelspace is applied. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 68 Sets the output mode to Aux. <SourceName> Source name from Sources list. — <BackgroundColorRed> Defines a color for the background. 0-255 <BackgroundColorGreen> <BackgroundColorBlue> X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 69: Ocr-Output Configuration Rotation

    Commands OCR–Output Configuration Rotation Sets the rotation parameter of a specified output. Rotation is not supported on all output module types. For additional information, contact Christie Technical Support. Syntax OCR <OutputID> <RotationAngle> Response <Result Code> Refer to page Command processor responses, for additional information on Result Codes.

  • Page 70: Ocs-Output Configuration Save

    Result Codes. Arguments Argument Description Values <OutputID> Sets the ID of the output to save. Zero-based X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 71: Ocu-Output Config Undo/Cancel

    Result Codes. Arguments Argument Description Values <Output ID> Output ID to cancel changes on. Numeric output index X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 72: Ofz-Freeze Output

    0 = Disables freezing the output layers. 1 = Enables freezing the output <Output1>..<OutputX> Sets the IDs of the outputs to freeze or — unfreeze. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 73: Ogp - Output Get Properties

    <Property Name> <Property Type> <Current Value> Arguments Argument Description Values <Layer ID> Determines the properties of the source that the layer is using. 2 - 26 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 74: Osp - Output Set Properties

    Result Codes Arguments Argument Description Values <Output ID> Determines the output config object ID. 0 - 15 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 75: Qrc-Query Router Crosspoint

    Description Values <RouterID> Sets the router ID to query. — <OutputID> Sets the router output to query the status for. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 76: Rar-Request Aspect Ratio

    Argument Description Values RAR <Layer> Sets the ID of the layer or the source name to request the aspect ratio — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 77: Ras-Request Active Sources

    Indicates if the specified source is visible on a Program 0 = Preview PixelSpace, a Preview PixelSpace, or both. 1 = Program 2 = Both X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 78: Rbl-Request Basic Preset List

    <MaxCount> Sets the maximum number of registers to return. — <Chars> Sets the number of characters to truncate names to. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 79: Rcr-Router Crosspoint Recall

    Spyder Studio, stored as part <Output> Sets the output to switch. Zero-based <Input> Sets the input to switch. Zero-based X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 80: Rcs-Request Connection Status

    0 = Disconnected 1 = Connected 2 = Unknown Current connector type 0 = HDMI 1 = Display Port 2 = SDI X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 81: Rif-Request Image File

    Optionally, specify maximum width or Numeric value height] height of the image. Image scaling will maintain aspect ratio. Useful for grabbing thumbnails. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 82: Rlc-Request Layer Count

    — The logical layer count includes two background layers in Spyder. In most cases, applications should subtract two from the response. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 83: Rlk-Request Layer Keyframe

    Commands RLK–Request Layer KeyFrame Retrieves the KeyFrame values for a layer ID. Christie recommends implementing the code to handle additional values which may be appended to the end of the responses in future versions. Syntax RLK <LayerID> Response <Result Code> <Relative HPosition> <Relative VPosition> <X Position> <Y Position>...

  • Page 84: Rls-Request Layer Source

    Result Codes. Arguments Argument Description Values <LayerID> Specifies the ID of the layer to retrieve the information for. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 85: Rpd-Request Pixelspace Definitions

    Result Codes. Arguments Argument Description Values Returns a list of all the pixelspaces currently defined in the — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 86: Rpm-Request Pixelspace Mappings

    <Result Code> <Count> [<ProgramID> <PreviewID> <Preview Scale Ratio>]… Refer to Command processor responses, page 10, for additional information on Result Codes. Arguments None. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 87: Rpn-Request Page Names

    7 (0x37) = Function key 8 (0x38) = Not used 9 (0x39) = Not used 10 (0x31 0x30) = Still image X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 88: Rps-Request I/O Processor Status

    Result Codes. Arguments Argument Description Values <Chars> Sets the number of characters to truncate names to. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 89: Rrc-Request Register Count

    9 (0x39) = Not used 10 (0x31 0x30) = Still image <PageNumber> Determines the page number to return. Zero-based -1 = Return all pages X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 90: Rrd-Request Register Detail

    7 (0x37) = Function key 8 (0x38) = Not used 9 (0x39) = Not used 10 (0x31 0x30) = Still image <RegisterID> X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 91: Rrl-Request Register List

    Sets the maximum number of registers to <MaxCount> — return. <Chars> Sets the number of characters to Positive integer truncate register names to. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 92: Rsc-Recall Script Cue

    To access registers on pages above the first page, add the page number * 1000 to the register ID to be recalled. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 93: Rscc-Request Script Cuedata Count

    Numeric script or register ID ID> [ID Type] Specifies if the ID is a script or register ID. S: Script ID (Default) R: Register ID X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 94: Rscd - Request Script Cuedata Details

    [ID Type] Specifies that the ID provided is a script S: Script ID (Default) ID or a register ID. R: Register ID X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 95: Rsec-Request Script Element Count

    [ID Type] Specifies that the ID provided is a script S: Script ID (Default) ID or a register ID. R: Register ID X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 96: Rsf-Request System Framerate

    Frame Rate that is used in Frame Setup of the Configuration Manager. . Syntax Response <System Frame Rate ID> Frame Rate FR_60 NTSC FR_48 FR_30 FR_29_97 FR_25 FR_24 FR_23_98 Arguments None. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 97: Rsn-Request Source Name

    Command processor responses for additional information on Result Codes Arguments Argument Description Values Returns a list of sources names separated by spaces. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 98: Sav-Force Server Save

    Result Codes Arguments Argument Description Values Forces the remote frame to save all configuration and user — changes to non-volatile storage. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 99: Scl-Clear Still On Layer

    Command processor responses for additional information on Result Codes Arguments Argument Description Values <Layer1>..<LayerX> Sets the IDs of the layers. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 100: Scr-Script Cue Request

    Sets the script ID to request the status for. — <Type> Defines the ID type for the specified script. S = ScriptID R = RegisterID X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 101: Sdn-Restart Spyder Server

    <0 | 1> Remotely restarts or powers off the server 0 = Powers the server off application. 1 = Restarts the server X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 102: Sld-Load Still On Layer

    Argument Description Values <Filename> Sets the name of the file to load. — <Layer1>..<LayerX> Sets the IDs of the layers. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 103: Slr-Slide Layout Recall

    6. Border Color G (0-255) 7. Border Color B (0-255) 8. Border Thickness 9. Slide Transition Type (integer) 10. Transition Duration (frames) X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 104: Srs-Stop Running Scripts

    Specifies whether to cancel cue triggers D: Disconnect layers from scripts or to disconnect layers from scripts. S: Cancel pending cue triggers X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 105: Sra-Source Apply

    <Name> Provides the name of the source. — <Layer1>..<LayerX> Sets the IDs of the layers to apply the source to. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 106: Swa- Swap Layers

    First layer of the two-layer swap. Numeric layer ID <Second Layer ID> Second layer of the two-layer swap. Numeric layer ID X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 107: Tpc-Test Pattern Clear

    Specifies whether to clear test patterns 0: PixelSpace on outputs, PixelSpaces, or layers. 1: Layer 2: Output <ID> Target ID to clear. Numeric ID X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 108: Tpl-Test Pattern Load

    If enabled, a 1 pixel outline will be drawn 0: disabled around the test pattern using the 1: enabled foreground color. X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 109 Background Blue Color 0-255 [FG Red] Foreground Red Color 0-255 [FG Green] Foreground Green Color 0-255 [FG Blue] Foreground Blue Color 0-255 X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 110: Trn-Transition Layers

    Sets the transition duration in number of frames per second. — <Layer1>... <LayerX> Sets the IDs of the layers to transition. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 111: Zpa-Zoom/Pan Adjust

    -2048 to 2048 <VerticalPan> Sets the vertical pan value. -2048 to 2048 <LayerID> Sets the layer of the KeyFrame to adjust. — X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 112 Index X80 Serial Commands Reference 020-102207-08 Rev. 1 (10-2020) Copyright © 2020 Christie Digital Systems USA Inc. All rights reserved.

Table of Contents